Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
04-02-2005, 07:10 PM | #1 | |
AF Newbie
|
Detailing Routine to Perfection
If you are like me and live up North with some snowy winters, we all know how harsh the salt and grime of winter roads can bring. I figured I’d share some of my knowledge and my detailing routine I do to perfect my car!
Exterior Detailed to Perfection: 1.) Fill up 2 5-gallon wash buckets about 50% full, using one for clean water with shampoo and one as a dirty, rinse off bucket. 2.) Add 2 caps of P21S Bodywork Shampoo and fill the first wash bucket up to about 80% to suds up the water. 3.) Before I tackle the paint I like to spray P21S Wheel Gel on my wheels and let it sit as I shampoo the paint. 4.) Using a foam wash sponge scrub the entire car from top to bottom. For tougher areas such as the front bumper, behind tires, and low body panels I like to use this bug and tar removal block. It works great for removing bugs, tar, and other grime that the foam sponge won’t work off. Work in sections while shampooing the paint and constantly keep the paint wet. Scrub an area and then spray it down. Try to consistantly keep the paint wet until it is time to dry. This will minimize soap / water marks. 5.) As the foam sponge gets dirty or loses its suds rinse it out in the 2nd wash bucket and proceed to get more shampoo suds from the first bucket. Do this until the entire car is washed. 6.) After washing the car I like to clean my tires with 303 Aerospace Cleaner then scrub them with a firm bristle tire brush 7.) Before I spray down the car for the final time I like to take a wheel brush to my wheels to loosen any debris the wheel cleaner wasn’t able to remove. 8.) When the car is rinsed off, (this is a great tip) remove the spray nozzle so water is flowing freely from the hose. Start from the top of the car and let the water sheet off. This will reduce the time you spend drying a LOT! 9.) I then proceed to dry the car with a large waffle weave microfiber. I feel this is the best drying tool available and is more than adequate to do 2 cars at once! Make sure you open your doors, hood, and trunk and get all the places water loves to seep into. If you have an air compressor this is a good time to use it to blow out mirrors, wheels, around trim, etc. 10.) I will usually make a second pass at the car with another dry waffle weave microfiber towel to ensure all moisture is off the car. 11.) Next step I break out the clay bar. I like to use Clear Kote’s Detailing Clay because it is large enough to cut into 1/3s and store in their handy plastic container. 12.) Spray the quick detailer solution onto the car and gently work the clay in a 2’ x 2’ area. You will notice the paint becoming smoother as you work. If you feel it start to skid apply more solution in that area. Once that area is complete I wipe excess detailing solution with a microfiber towel Feel free to give your car another wash at this point to release any debris loosened up from the clay bar. Make sure it is completely dry before doing any other steps. 13.) Now your paint is ready for some real work. If your paint has swirls you are looking to remove from the winter months (or the past) then this is a great step for you. Select a polish with the proper abrasiveness your paint requires. I like to go with a light abrasive polish since my paint is relatively new. My product of choice is Poorboy’s Super Swirl Remover 1. Apply this product using moderate pressure, otherwise you will not remove the swirls and scratches. I like to spray my applicator pad with a quick detailing solution for added lubrication before applying the polish. Work in small 2’ x 2’ sections. Then buff off with a microfiber towel. 14.) Next to really bring out the gloss and shine you want I use a finishing polish. Many people are under the misconception that the wax brings out the gloss and finish when in reality it is the polish, which many beginners skip. I like to use Klasse All-In-One Polish for optimal shine. Again, apply this product using moderate pressure. I like to spray my applicator pad with a quick detailing solution for added lubrication before applying the polish. Work in small 2’ x 2’ sections. Then buff off with a microfiber towel 15.) Now its time to seal the paint in with some sealant and wax. What I like to do is layer a couple of coats of sealant for optimal protection and then follow up with a carnauba coat to give it the wet look. What I found gives the best protection is Klasse High Gloss Sealant Glaze. Depending on my time restraint I’ll do between 1 and 5 coats. You should wait 8-12 hrs between coats to give the wax time to cure. Apply the sealant very sparingly (2oz or less on a car!) using very little pressure. I like to spray my applicator pad with a quick detailing solution for added lubrication before applying the sealant. Work in small 2’ x 2’ sections. Then buff off with a microfiber towel. 16.) Once I’m done with the sealant I put the finishing touch on the car, a nice layer of carnauba wax. The best carnauba wax out there is P21S Concours Carnauba Wax. This will give your car additional depth and give it that “wet look”. Apply the same way you would the sealant, very sparingly using very little pressure. I like to spray my applicator pad with a quick detailing solution for added lubrication before applying the sealant. Work in small 2’ x 2’ sections. Then buff off with a microfiber towel. 17.) Paint is done! Time to tackle the wheels and tires. Depending on how good a job the wheel and tire cleaners did, these steps may not be needed. If there is tar, brake dust, etc still on the wheels I like to run a clay bar over them. This is where cutting your clay bar into 1/3s helps b/c you’ll have a fresh piece just for your wheels. Follow the same procedure as you did on the paint with your wheels to clay them. 18.) After claying them I like to polish them up using P21S Metal Polishing Soap. P21S makes it simple by having the applicator pad handy with the product. While the metal polishing soap is out I will do my exhaust tips as well as any metal trim. 19.) To prevent more break dust and road grime from clinging to my wheels I like to seal them up with Poorboy’s Wheel Sealant. This will put a protective coating over the wheels and makes it easier to clean next time around. 20.) To finish up the tires I like to apply Poorboy’s Bold ‘N Bright Tire Dressing. This will give them a real nice finish and it is not greasy like other dressings that use silicone. 21.) Tires are done, all that’s left is the glass and trim. I love cleaning my headlight housings with Plexus Plastic Cleaner & Polish. It cleans plastic better than any other product I know of. If there is any other plastic on the car I will finish it off w/ Plexus. 22.) To finish things up on the glass and mirrors I use Diamondite’s 3 Step Glass Cleaning System. The first step is their spray clay which will remove old wax, acid rain marks, stains etc. from the glass. The second step is a glass foam cleaner which will take off all of the grime removed from the clay step. The final step is a shield that goes on the glass that helps repel rain and prevent further staining. I use a glass specific microfiber towel to make sure there is no dust or lint left behind. 23) Step back and view your masterpiece! =) Hope you found this post useful! The products can obviously be changed out for something similar, this is just what I choose to use. I have been professionally detailing for years so if you have any questions feel free to ask. Sincerely, George @ Detailed Image
__________________
Detailed Image |
|
04-03-2005, 12:48 AM | #2 | |
AF Regular
Join Date: Oct 2004
Location: Aurora, Colorado
Posts: 127
Thanks: 0
Thanked 0 Times in 0 Posts
|
I usually hose it off at the DIY carwash then speed her down the interstate the get it dry. How often do you doo all this? How much do you charge?
|
|
04-03-2005, 11:08 AM | #3 | |
AF Newbie
Thread starter
|
I will usually do this full routine twice a year. Other than that I just touch things up in between, maybe another coat of the wax/sealant every so often.
To get something like this done (all depends on the number of coats and size of a vehicle) but a car runs about $325 + This is just the exterior too, you can also do the interior from head to toe like that as well as the engine. George @ Detailed Image
__________________
Detailed Image |
|
04-03-2005, 04:22 PM | #4 | |
AF Enthusiast
Join Date: Oct 2004
Location: Marlboro
Posts: 586
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Detailing Routine to Perfection
Where can you get the products listed in your steps? I have a black blazer that needs some serious paint detailing. Also, how long does this usually take you. My normal detailing routine takes about an entire day and thats just normal wash, clean, and shine. Thanks for the info. Peace-
|
|
04-03-2005, 05:43 PM | #5 | |
AF Enthusiast
Join Date: Oct 2004
Location: potsdam, New York
Posts: 89
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Detailing Routine to Perfection
do you have to use polish?
i read that polish is like liquid sandpaper, that it simply sands off the top layer of paint to reveal the unoxidized inner layers, giving the paint a fresh/shiny look. now, i have a car that is less than 10 months old and since my paint is still pretty fresh, do i need to polish it to get a good shine?
__________________
|
|
04-03-2005, 08:33 PM | #6 | ||
AF Newbie
Thread starter
|
Re: Re: Detailing Routine to Perfection
Quote:
George @ Detailed Image
__________________
Detailed Image |
||
04-03-2005, 08:37 PM | #7 | ||
AF Newbie
Thread starter
|
Re: Re: Detailing Routine to Perfection
Quote:
Polish will definately enhance the gloss on the paint though. Feel free to contact me with any further questions. George
__________________
Detailed Image |
||
04-14-2005, 10:05 PM | #8 | |
AF Regular
|
Re: Detailing Routine to Perfection
what's your thoughts on Mothers carnuba cleaner wax? I've always been a strong believer in it but I've always wanted a professionals opinion on it. I was also wondering if this stuff called nu-finish is worth anything or not, I figured that you could tell me these things.
__________________
I'm back after a long mental evaluation and heavy medication! If you can't be a good example, you can always be a horrible warning! |
|
04-15-2005, 10:46 AM | #9 | |
AF Newbie
Join Date: Dec 2004
Location: Quincy, Illinois
Posts: 21
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Detailing Routine to Perfection
I appreciate you spending the time to write all that out, it seems to be a pretty good write up. I must respectfully disagree with you on only one aspect of that routine.
You state that " Using a foam wash sponge scrub the entire car from top to bottom. For tougher areas such as the front bumper, behind tires, and low body panels I like to use this bug and tar removal block. It works great for removing bugs, tar, and other grime that the foam sponge won’t work off." In all of my detailing experience I have found that either a sheepskin wash mitt or a chenille wash mitt will cause much less chance of marring than using a foam sponge. Im not bashing your personal technique at all, as I cannot see if you are getting marring because of using a sponge or not. But i would just like to add that most detailers would agree that a mitt would lessen the possibility of any marring. Once again, thanks for posting the quide, it is a very good one. |
|
04-20-2005, 11:15 PM | #10 | |
AF Newbie
Thread starter
|
Re: Detailing Routine to Perfection
Your right I should have written a natural seafoam sponge which is what I like to use, I personally am not a fan of washmits.
__________________
Detailed Image |
|
04-22-2005, 07:25 PM | #11 | ||
AF Newbie
Join Date: Aug 2004
Location: Jacksonville, Florida
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Quote:
|
||
04-24-2005, 04:58 PM | #12 | ||||||
AF Newbie
Thread starter
|
Re: Detailing Routine to Perfection
Quote:
Quote:
Quote:
Quote:
Quote:
I appreciate the constructive criticism and pointers. Sincerely, George
__________________
Detailed Image |
||||||
04-25-2005, 06:44 PM | #13 | |
AF Enthusiast
|
Re: Detailing Routine to Perfection
Nice and thorough man keep up the good work.
What you do is what I do pretty much but I do it about once a month. The only thing I dont do is polish/wax or seal the paint cus it simply doesnt need it. Its been over 3 years since Ive waxed my GA and it still gleams nicely. Cool job man not too many detailers pay that much attention to even there own machines. Plexus is the best plastic polish cleaner that I have found so far too. I wont even pick up a power polisher unless a customer is willing to pay $300+ just for the polish job. Thats not my fault tho the dealership charges the customers not me.
__________________
If its not clean CLEAN IT!! If its not gleaming SHINER UP!! If its not appealing BAG IT!!! |
|
|
POST REPLY TO THIS THREAD |
|
|