Any Idea How To Program Keyless Fobs For 1994 Jimmy??help!!

[jimmy23]

I have just purchased my 2nd Jimmy....and love it.
Its a 1994 Full load SLT....but it came with no remotes when I bought it at the auction.

I'm hesitating to bid on a used set of remotes on ebay...lol....till I figure out how I'm going to do this.

Anyone have ANY idea how to program a remote,a new/used one ??

Any advise for anything to do with the remotes??

Great forum by the way!!

[rapposm]

Reprogramming the GM Keyfob

Different keyless entry systems are used on General Motors vehicles. The parts are not interchangeable even though the parts may appear to be similar. Observe the back of the transmitter in order to properly identify the system. On 1998 S/T pickups and utilities, use a transmitter identified with GM/UTA preceding the part number.


1.With the driver door closed, hold down the power unlock button on the door panel.
2.Turn the ignition switch to the ON position.
3.Turn the ignition switch to the OFF position.
4.Turn the ignition switch to the ON position.
5.Turn the ignition switch to the OFF position.
6.Release the power unlock button on the door panel. The remote control door lock receiver will respond in the following manner in order to indicate that the receiver is in the programming mode:

Locking the doors
Unlocking the doors

Important

All extra transmitters must be programmed at this time. When a new transmitter is programmed, it will deactivate the old transmitters.

7.Hold down the lock and unlock buttons on the transmitter until the remote control door lock receiver will respond in the following manner:

Locking the doors.
Unlocking the doors.

8.Repeat step 7 for each additional transmitter.

9.Turn the ignition switch to the ON position in order to exit the transmitter-programming mode.


QUOTE=jimmy23]I have just purchased my 2nd Jimmy....and love it.
Its a 1994 Full load SLT....but it came with no remotes when I bought it at the auction.

I'm hesitating to bid on a used set of remotes on ebay...lol....till I figure out how I'm going to do this.

Anyone have ANY idea how to program a remote,a new/used one ??

Any advise for anything to do with the remotes??

Great forum by the way!![/quote]

[jimmy23]

rapposm.....thank you very much for taking the time to respond with your words of wisdom.....I really appreciate the detailed simple instuctions....again thank you!

I just have one question.....

If I purchase remotes from the 1994 vintage year that came from a blazer/jimmy......can I program them?? I realize you cant program a remote from a 1999 jimmy/blazer for example.

Again...thanks for your help!!

Jimmy23