 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-02-2006, 03:32 PM
|
#1 | |
|
AF Newbie
Join Date: Jun 2006
Location: Austin, Texas
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
1996 keyless entry programming
I have a 1996 Buick Regal and I need to program two new remotes.
I see about three different methods referenced on this site, but no one says which process works. Can someone help? |
|
|
|
|
06-03-2006, 07:43 PM
|
#2 | |
|
AF Newbie
Thread starter
Join Date: Jun 2006
Location: Austin, Texas
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1996 keyless entry programming
I found the answer myself. It worked.
In the trunk next to the antenna, there is a wire that is not connected to anything. Jumper it to ground. The car locks and trund lock will cycle. Press the lock button on the remote. The door locks will cycle, but the trunk will not. If you have another remote, press the lock button. The door locks will cycle, the trunk will not. Remove the jumper. The remotes are programmed. photopm@gmail.com |
|
|
|
|
|
06-22-2006, 11:34 PM
|
#3 | |
|
AF Newbie
Join Date: Apr 2004
Location: grand forks, North Dakota
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1996 keyless entry programming
where did you find the instructions? I have a 97, the all the instructions I found for mine dont work. thanks for your help.
|
|
|
|
|
|
06-23-2006, 08:10 AM
|
#4 | |
|
AF Newbie
Thread starter
Join Date: Jun 2006
Location: Austin, Texas
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1996 keyless entry programming
I found them on the internet in a post by a GM Maint shop Manager.
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
