 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
08-31-2005, 09:09 PM
|
#1 | |
|
AF Newbie
Join Date: Aug 2005
Location: Virginia Beach, Virginia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
95 keyless programming
1)Ground pin G of DLC connector under driver side dash,receiver will cycle locks within 2 seconds.
2)Press any button on Key module,locks will cycle. 3)Remove grounding wire. 4)Test Remote 5)Smile! This worked to program my 95 suburban keyless remote. Last edited by pungoVA; 09-01-2005 at 08:11 PM. |
|
|
|
|
02-15-2006, 08:18 PM
|
#2 | |
|
AF Newbie
 Join Date: Aug 2005
Location: Milledgeville, Illinois
Posts: 11
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 95 keyless programming
Do you just ground the wire to a piece of metal, or is there a certain metal contact in the DLC connector you have to attach the wire to?
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
