![]() |
![]() |
Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
![]() | ![]() | ||
![]() | ![]() |
| Latest | 0 Rplys |
|
![]() |
![]() ![]() ![]() |
|
Thread Tools |
![]() |
#1 | |
AF Regular
Join Date: Feb 2006
Location: st.louis, Missouri
Posts: 163
Thanks: 0
Thanked 0 Times in 0 Posts
|
how do you count the knock on the engine?
i saw some people use race gas to have less knock.how do you read it?
![]() |
|
![]() |
![]() |
![]() |
#2 | |
AF Enthusiast
|
Re: how do you count the knock on the engine?
The knock sensor counts detonations inside the engine, and can be counted on a scan tool connected to the DLC. If your going to boost your engine, you need to use high test fuel. Higher combustion chamber pressures and temps normally require you to use it..
__________________
2007 Certified DaimlerChrysler Service Technician... True blue GM at heart. |
|
![]() |
![]() |
![]() |
#3 | |
blue + red light magnet
![]() Join Date: Jun 2003
Location: Philadelphia, Pennsylvania
Posts: 9,195
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: how do you count the knock on the engine?
Race gas isn't necessary unless you are heavily modded. The stock turbos wont be able to flow enough air to need such high octane.
However, keeping an eye on knock is one of the best things you can possibly do when you start tuning. On obd1 cars (91-93) it is really easy. All you need is a datalogger and a palm pilot and you can monitor it while you drive, and turn up the boost accordingly. They are in teh process of doing making similiar software for the hybrids (94-94) and I think as of now, you can do it on them too. OBD2 cars (96-99) are the ones you can't. Which sucks. So for those, other tuning options become necessary. Such as a combination of monitoring wideband o2 readings and the ecu's timing control. It is hard to explain all the options and factors for tuning, as there is so much. The best way is to really just read as much as you can, and ask when you don't understand, so that you can figure out which direction you want to take. The bottom line though, if you have a 91-93, one of the first things you shoudl buy is a datalogger and palm pilot because it is an invaluable resource. Until you are monitoring knock, or learn to tune, you really shouldn't go above 14psi. Some say 14.5, or 15, but 14 about as much as I'd suggest pushing it. This works out well though, because the stock turbos (9bs) really can't do much better. Going beyond isn't really necessary until you make fuel/turbo upgrades.
__________________
96 3000gt vr4 -K&N FIPK -Proboost mbc -Cusco front + rear strut bars -Greddy type-s -ATR downpipe -no cats -15Gs, 3sx aluminum pulley, FMIC, SAFC, walboro pump, EVO 560ccs, and Meth Injection Kit all waiting to go in shortly. Your 1996 Mitsubishi 3000GT VR-4 is the 92nd out of the 315 that were made that year. Only 21 of which are exactly identical. |
|
![]() |
![]() |
![]() |
#4 | |
Your worst nightmare
![]() Join Date: Oct 2004
Location: Smithfield, Pennsylvania
Posts: 6,080
Thanks: 45
Thanked 255 Times in 249 Posts
|
Re: how do you count the knock on the engine?
Shiver has had his 94-96 loggers out for a while now. I want one.
![]() And yes no need for race gas unless you are highly modded.
__________________
![]() |
|
![]() |
![]() |
![]() |
#5 | |
AF Regular
Thread starter
Join Date: Feb 2006
Location: st.louis, Missouri
Posts: 163
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: how do you count the knock on the engine?
ok so what should i buy to count my knocks?i have 93 vr4.
|
|
![]() |
![]() |
![]() |
#6 | ||
AF Enthusiast
|
Re: how do you count the knock on the engine?
Quote:
read through this thread and it should answer many of your questions: http://www.automotiveforums.com/vbul...ght=datalogger
__________________
93 3000GT base K&N | long tube headers | 3sx crank pulley| testpipe | Addco front/rear sway bars (3SX) | rear strut bar & front 3-point strut bar (by JonVr4 on 3Si) | solid motor mounts | LSD insert | KYB GR-2 struts | intrax springs | adj. control arms | ss brake lines | 16% taller 5th gear (teamrip.com) | H4 conversion | push-button start | datalogger | HKS S-AFR | PLX WB O2 coming soon: adj. cam gears | bi-xenon HID retrofit |
||
![]() |
![]() |
![]() |
#7 | |
blue + red light magnet
![]() Join Date: Jun 2003
Location: Philadelphia, Pennsylvania
Posts: 9,195
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: how do you count the knock on the engine?
http://automotive.miragecorp.com/
software and cables available here. Then all you need is a cheap palm off ebay like Linebckr mentioned.
__________________
96 3000gt vr4 -K&N FIPK -Proboost mbc -Cusco front + rear strut bars -Greddy type-s -ATR downpipe -no cats -15Gs, 3sx aluminum pulley, FMIC, SAFC, walboro pump, EVO 560ccs, and Meth Injection Kit all waiting to go in shortly. Your 1996 Mitsubishi 3000GT VR-4 is the 92nd out of the 315 that were made that year. Only 21 of which are exactly identical. |
|
![]() |
![]() |
![]() |
#8 | |
AF Enthusiast
|
Re: how do you count the knock on the engine?
oops. ya i forgot to mention the cable. you'll need one to connect the datalogger (palm pilot or laptop computer) to the in-car diagnostic port. i got my cable off ebay a few years ago for about 45 bucks. you might search around, i'm sure there are other options than the miragecorp $70 cable.
and as for datalogging software, the link i provided offers many differen't software options, and compares them. the open source one i use from MMCd is free and can log more parameters than the others. but you can read all about that.
__________________
93 3000GT base K&N | long tube headers | 3sx crank pulley| testpipe | Addco front/rear sway bars (3SX) | rear strut bar & front 3-point strut bar (by JonVr4 on 3Si) | solid motor mounts | LSD insert | KYB GR-2 struts | intrax springs | adj. control arms | ss brake lines | 16% taller 5th gear (teamrip.com) | H4 conversion | push-button start | datalogger | HKS S-AFR | PLX WB O2 coming soon: adj. cam gears | bi-xenon HID retrofit |
|
![]() |
![]() |
![]() |
#9 | |
AF Enthusiast
|
Re: how do you count the knock on the engine?
the same guy i purchased my datalog cable from off ebay 3 years ago is still selling them on ebay! here's a link to some of his auctions: http://search.ebay.com/_W0QQfgtpZ1QQ...untdepolygonze. his cables only work with first gen 3S's (91-93), and since you have a 93 vr4, you're in luck. its 35 bucks, shipping included, so half the price of the miragecorp cable.
__________________
93 3000GT base K&N | long tube headers | 3sx crank pulley| testpipe | Addco front/rear sway bars (3SX) | rear strut bar & front 3-point strut bar (by JonVr4 on 3Si) | solid motor mounts | LSD insert | KYB GR-2 struts | intrax springs | adj. control arms | ss brake lines | 16% taller 5th gear (teamrip.com) | H4 conversion | push-button start | datalogger | HKS S-AFR | PLX WB O2 coming soon: adj. cam gears | bi-xenon HID retrofit |
|
![]() |
![]() |
![]() |
#10 | |
AF Regular
Thread starter
Join Date: Feb 2006
Location: st.louis, Missouri
Posts: 163
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: how do you count the knock on the engine?
thank you guys
|
|
![]() |
![]() |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|