head work/ please help

do you have to pull the motor o a 94 firebird 3.4 V6 to replace the head gaskets?

do you have to pull the motor o a 94 firebird 3.4 V6 to replace the head gaskets? Its a tight fit

as far as i know, no you dont, either way you do, its will be a PITA, but it has been done in car before

Its a tight fit

And imagine a 8 cyl in there instead. It's a bitch but it can be done motor in with the right tools for the job.

No, I did the heads on my car when it had the 305 in it. It really isn't too bad, the hardest part is getting the exhaust manifolds off so you can get to the head bolts below them.

No, I did the heads on my car when it had the 305 in it. It really isn't too bad, the hardest part is getting the exhaust manifolds off so you can get to the head bolts below them.

Alltrue, but this a 4th gen where half the motor is under the windshield cowel.

Alltrue, but this a 4th gen where half the motor is under the windshield cowel.
Still doable, especially with a V6

i have done it with an lt1 and just basic home tools so with some creativity you shouldn't have any problems

yes you can its not that hard, don't even have to move the radiator with the v6 lol