b18 motor problem, HELP!

oil got into my spark plugs(3,4cyl) wat went wrong?

have you checked the inside of your head?, look for the spark plug O rings

have you checked the inside of your head?, look for the spark plug O rings

i tookthe cams out, some people are saying valve seals or piston rings:banghead:

i tookthe cams out, some people are saying valve seals or piston rings:banghead:

WTF did you do that for?? There was no reason to just pull the cams out...its probably the little rubber gromits that keep the oil in the head from getting onto the plugs....also you wouldnt have excessive oil on the plugs if the rings of valve seals were bad so dont listen to those people...you would burn oil instead.

well dude if you continue experiencin problems, ill ask my buddy, hes a master tech at honda. just get back to me if you need anything else

i had a problem very similar, check for excessive blowbye, oil came out of the tube that leads to my intake and went in trough the intake and was injected into the cylinders, so try plugging the tube to see what happens, then go from there

My question is this, where on the spark plug is the oil, on the threaded part towards the inside, or the bolt head part towards teh plug wire?

check your valve cover gasket my 92 ls did the same thing i replaced the valve cover gasket and it went away