Our Community is 940,000 Strong. Join Us.

window problem


Trueeclipse
03-13-2006, 09:21 PM
Hey


Im not talking about the window rattle all 2nd gen eclipses end up with.

But im talking about the windows just dieing when I push the roll up button...


Has anyone encountered this problem?


Also the window seems loose from the rack when its rolled up because when i put my hand on it and wiggle it, it freely wiggles...


anyone have any insight
?
Blackcrow64
03-13-2006, 10:14 PM
Your window motor is dying and the window shims screws need to be loosened and slide out some and retightend. :)
Trueeclipse
03-14-2006, 09:06 PM
Your window motor is dying and the window shims screws need to be loosened and slide out some and retightend. :)


could you give me some detail as to where and what exactly needs to be tightend?
Blackcrow64
03-14-2006, 09:21 PM
Yeah, tomorrow night I'll bring my manual in and scan the diagram for you and post it up so you can see the shims I'm talking about. :)
Trueeclipse
03-15-2006, 02:59 PM
Yeah, tomorrow night I'll bring my manual in and scan the diagram for you and post it up so you can see the shims I'm talking about. :)


amazing thanks so much!
Blackcrow64
03-21-2006, 11:12 AM
Sorry it took me so long to get this scan. I just spent over 24 hours of putting my Talon back together and haven't had time to even eat... Hope this helps ya.

As you can see, part of the scan got cut off. But here is all we are looking at. Number 4 is where the shims are that need adjusted. They call them Inner Stabelizers though but its pretty much the same thing. lol

http://www.geocities.com/blackcrow42785/window.jpg
Trueeclipse
03-23-2006, 04:09 PM
sweet man, thanks a lot! Im gunna try this when it gets warmer, but thanks again for taking the time!
Blackcrow64
03-24-2006, 01:05 AM
Yup, no problem. :thumbsup:

Add your comment to this topic!