Engine Swap Help

i have a basic QG18DE engine in my car and i was wondering if i could swap that engine out for a QR25DE or even a VQ35DE engine or am i just stuck with the QG18DE one.

You should be able to swap to the SR20, but I think there's a major difference between the 1.8's and the SE-Rs preventing you from swapping to the 2.5 and 3.5 motors with ease. For any swap you are considering you will need at LEAST the following:

Motor
Tranny
ECU
Motor mounts
wiring harness
front axles
and most likely much more.

1.8 crossmember is different preventing the qr25 or vq35 swap, not to say you couldnt do some fabbing but youd be pioneering your own swap, no help from anyone

ok, well what about tryin to swap it out for a SR20DE(B15 Version):

Yes, the SR20 is what I was talking about in post #2.

could either swap the sr20 or just turbo your motor, may cost around the same but who knows, i couldnt bring myself to mod my 1.6 gxe.......just seemed like trying to buff a mud puddle

hey nismo pilot iv've not been able to find a turbo kit for my 01 sentra xe. ive only seen it for the earlier and later models. if u know where i can find one please let me know

there isnt one, you have to call up protech and have them fab a manifold for teh qg18, they will know what youre talking about...... then peice together some intercooler piping and source an intercooler and turbo, BOV, wastegate ect.....it will end up cheaper than a kit

whats the number for protech so that i'll be able to call them

check teh website nukkuh