Is there a way to test the ABS Sensors on a 2001 Rodeo, 2.2L engine?

I get an intermittent ABS light. I have inspected the brakes, fluid, and wiring, and it all looks good.

Try looking here.

ABS DTC (http://forums.klipsch.com/idealbb/files/ABS%20DTC.pdf)

Also, if you can get to the connectors and stick an ohm meter on them, these are the correct readings for the three sensors.

FL/FR 2.0-2.8 kOhm
Rear 1.0-1.7 kOhm

Could also be bad wiring or a bad connector.

Hope this helps. Good luck!

Thanks for the information.