Ecu question
Miatch
08-12-2005, 01:32 PM
I have a 93 honda civic cx with no rpm gauge so I am going to put in a proform tach, and before i decided to do anything i would take a look at the ecu to figure out where to put in the green wire. Now my car never came with the users manual so i was just curious if anyone had a picture or even could just tell me where to put the green wire because i dont know where the tach terminal is. any help would be appreciated!!
snowman2005
08-12-2005, 04:59 PM
blue wire that plugs to ur guage cluster. i think its on the left harness. u have to take the cluster out to get to it
fasthatchb18c1
08-13-2005, 02:59 AM
blue wire that plugs to ur guage cluster. i think its on the left harness. u have to take the cluster out to get to it
you could also feed it through the firewall and connect it there(if the green wire is long enough). Less work but not as clean looking.
you could also feed it through the firewall and connect it there(if the green wire is long enough). Less work but not as clean looking.
Automotive Network, Inc., Copyright ©2026