hazard switch wiring order

[Karas]

When removing the hazard switch the wires disconnected from the female connector.Only one wire remains connected

89 [COLOR=green ! important][COLOR=green ! important]Ford [COLOR=green ! important]Mustang[/color][/color][/color] lx 2.3 l 150k miles
the prongs inside the switch body are labeled

(left - right) L E R F...top
S G I....bottom

the wires are as follows:

Double (2 wires connected) - Black
Red white
Double - Blue orange/blue white
orange yellow
green
Double - red blue

the Blue wire still attached corresponds to the ( S ) prong on the switch


i have called all the dealerships looking for the edtm on this( they gave em away years ago :P) ,tried the local mustang club, tried all the electrical repair shops( none could find a better shcematic for this than in the haynes manual),autozone, Goggle, and still trying the forums

if any one can pop thier switch and take a look id appreciate it

the removal is easy takes aobut 30 secs

it looks to me the gt series is the same dash setup as the lx but you guys would know alot better than me

1989 mustang lx 2.3

1989