anyone want 19 in HREs on your 240?

[imaiami]

4 X 114.3 HRE 546 19 x 8 1/2 w tires
.
they are off an accord, but I still might buy a 240 to sit them on if no one buys them

I completely renewed them for a new project that is in progress but I have chosen not to finish her and to just sell the wheels and brakes due to time and finances.

the wheels sit out about 2 in from stock body on an accord, so don't buy them if you think they will fit witout some flares or some sort of rolled fenders. then again, I haven't put them on a 240/180 yet.

the tires are 2 pirelli p7000 and 2 toyo proxie ts1..235/35/19..the pirellis are used w low miles and the proxies are new.

the wheels originally were bought with the pirellis for just under 7 grand,
now they are a completely different brand new wheel..
the rebuild with polishing, buying new lips and a new wheel, powdercoating and putting back together and sealing cost me about 3 grand.
the brakes were just over 2 grand.....
the wheels are in perfect condition, not a nick or scratch.....

here are the rims

http://i30.photobucket.com/albums/c3...s/P1010023.jpg

http://i30.photobucket.com/albums/c3...s/P1010020.jpg
the color of the powdercoating close up
http://i30.photobucket.com/albums/c3...s/P1010029.jpg
the rubbers
http://i30.photobucket.com/albums/c3...s/P1010027.jpg
too pretty not to show
http://i30.photobucket.com/albums/c3...s/P1010025.jpg
showing the offset, sitting about 1.75 in from the stock fender at just under 0 degrees camber.
http://i30.photobucket.com/albums/c3...s/P1010024.jpg
the front of my car has a mindboggling positive camber on a lowered accord. first case in history I thing.
we can't seem to figure it out.......but with this much positive camber it looks like the wheel sticks out a lot on top, but with camber on any normal accord lowered, which is negative, they will sit just like the rear wheel
http://i30.photobucket.com/albums/c3...s/P1010022.jpg

http://i30.photobucket.com/albums/c3...s/P1010021.jpg
what they looked like on an accord nicely
http://i30.photobucket.com/albums/c3...ontlowshot.jpg
I need to sell them.....
any serious offers welcome.
e mail me @ [email protected]

[driftking777]

not to be an ass, but im guessing if the wheels sit 2inches in on accord stock fenders, there going to look bad on a 240...but thats just me

[imaiami]

they probably won't look good without any rolling of fenders or some flares or even the one off 1 in over stock fenders and quarters they sell for the 240.
unless you want 19 in mario cart hres..........
they really might go on a 240 with minimal work to the fenders,
maybe just a baseball bat, wooden of course, and just 4roll up the fenders quite a bit and they could sit.
probably will look quite euro...but reguardless agressive as shit...
then again, with that euro style it is always 16s, so you couldn't even classify them as euro sittin like that.
I might get a 240 and get some photos with the wheels on it just to show how it sits.

[Skylindrftr]

My freinds uncle just got some HRE's on his 911 and they were like 10k for 4 wow

[imaiami]

I am definetly not expecting 10 grand,,,,,
definetly under half that.......

[Chuki_breath]

i heard hre's are waste of money for what they are. They break all the time at the strip. Seen pics.....wheels spokes just snap. 10 grand for hre's is definantly a waste of cash. Unless there platinum.......in which i would melt down and sell. Shit for that much you could get a badass set of advans.....

[Skylindrftr]

true...^