|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
| Wheels/Tires/Suspension All the handling help you need. No matter what Honda/Acura you drive. |
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Jul 2004
Location: Seattle
Posts: 25
Thanks: 0
Thanked 0 Times in 0 Posts
|
Questions
Alright so I'm planning on lowering my 2000 Civic Si and need some help. I think I'm going to go with Tokico Illumina Shocks and a Omni Camber kit...but on the subject of springs I am confused. I do only street driving... but I want to make sure I don't lower it too much for fear of ground clearence.
Should I go with Eibach Sportline springs or the Eibach prokit springs? Or... maybe I should go with another brand of springs like Tokico or Neuspeed... Any help would be greatly appreciated. |
|
|
|
|
|
|
#2 | |
|
AF Regular
![]() |
Re: Questions
i have used tokico and neuspeed both and had great results with both of those. i have rode in my brothers car and he had eibach pro kit springs on there and the ride wasnt nearly as good as the neuspeed racing i had. choosing a good shock is a wise decision also cause if you leave it stock its gonna ride pretty bad. i used tokico hp and the ride was alot better. make sure you leave your factory bump stops on there cause you'll bottom out pretty bad if you dont. hope his helps a little, i am not trying to knock eibach i just wanted to give you an idea on the neuspeeds
|
|
|
|
|
|
|
#3 | |
|
AF - Advisor
![]() Join Date: May 2003
Location: too damn far., California
Posts: 3,039
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Questions
From Eibach prokit/tokico illuminas to proactive coils/tokico illuminas, i wish i had the proactives in the first place.
__________________
99 [email protected] psi si- I voted for the Terminator for Gov. 95 HB- B16a2- SC34@12psi WTB: USDM B16a2 or B16a3 complete short block. pm is the key. FS: B series InlinePro cast mani, PnH RC 550s, and Hondata S2b. pm me. |
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|