 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-22-2010, 10:04 AM
|
#1 | |
|
AF Newbie
Join Date: Jun 2010
Location: ramona, California
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
ABS and Traction Control Lights on after Jump start
Jump started my '99 Seville SLS from under the hood. Let some factory installed smoke out from near the coils. Now I have some lights on the dash, ABS and Traction Control & two messages, Service Stability Sys & Service Steering Sys. Brake pedal seems a bit stiff and steering is a bit stiff. White smoke from exhaust when first started, but seems to drive okay. Any suggestions?
Thanks! Jerry |
|
|
|
|
06-22-2010, 05:44 PM
|
#2 | |
|
A990 racer
 Join Date: Mar 2002
Location: Chestertown, New York
Posts: 17,026
Thanks: 26
Thanked 381 Times in 372 Posts
|
Re: ABS and Traction Control Lights on after Jump start
You need a full scan to access the bcm anti lock/steering codes.
__________________
|
|
|
|
|
|
06-23-2010, 11:39 AM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Jun 2010
Location: ramona, California
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: ABS and Traction Control Lights on after Jump start
I used my friends ODBII scanner and did not get any codes.
|
|
|
|
|
|
06-23-2010, 11:48 AM
|
#4 | |
|
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 17,026
Thanks: 26
Thanked 381 Times in 372 Posts
|
Re: ABS and Traction Control Lights on after Jump start
A regular obd11 scanner will not access abs codes, you need a high line scanner such as Snap- On, MT or MTG 2500.
__________________
|
|
|
|
|
|
06-23-2010, 10:17 PM
|
#5 | |
|
AF Newbie
Thread starter
Join Date: Jun 2010
Location: ramona, California
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: ABS and Traction Control Lights on after Jump start
Okay, Thanks!
|
|
|
|
|
|
05-11-2011, 08:45 AM
|
#6 | |
|
AF Newbie
Thread starter
Join Date: Jun 2010
Location: ramona, California
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: ABS and Traction Control Lights on after Jump start
Dealer replaced EBC (Electronic Brake Control) Module.
Problem Fixed. Thread is now dead. |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
| Tags |
| abs , control , stability , steering , traction |
 |
| Thread Tools | |
|
|
