Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-29-2010, 11:53 PM | #1 | |
AF Newbie
Join Date: May 2008
Location: Atlanta, Georgia
Posts: 89
Thanks: 0
Thanked 0 Times in 0 Posts
|
How to remove headlight LENS on 1999 Grand Marquis
How the heck do you remove the headlight LENS on a 1999 +/- Grand Marquis /Crown Vic'???!!!
I removed the four metal clips, and made my best attempt to remove/cut-away the sealant (Sylicone, or whatever it is)...Though I can't seem to get to the sealant that's UNDER the clear lens-- between it & the headlight housing. I imagine that's the problem-- Removing the sealant, that I can't get to but, if that's the case, why do they bother putting the four metal clips on there??? I need to get inside the housing so I can clean-out the dirt inside... And yes, I've already tried removing the headlamp & turn signal, then blowing it out with an air-gun/compressor. That did remove a small ammount of dust but, there's still a bunch o' dirt that I cant "blow-out"(!) Thanks, in advance! Lt'C ________ MEDICAL MARIJUANA PATIENT Last edited by LieutenantCracker; 04-21-2011 at 07:16 AM. |
|
|
POST REPLY TO THIS THREAD |
Tags |
headlight , lens , remove , sealant |
Thread Tools | |
|
|