Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Honda > Element
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 03-09-2020, 06:53 PM   #1
RIP
AF -Advisor
 
RIP's Avatar
 
Join Date: Mar 2004
Location: San Diego, California
Posts: 3,858
Thanks: 7
Thanked 89 Times in 89 Posts
P0325 Knock Sensor $700 rip off

04 Element 2.4 ltr engine. Don't waste the $700 bucks or so a Honda dealer will charge to change the knock sensor. I changed it in about 90 minutes in my driveway using a ratchet, combination of extensions, a universal joint and a 27 mm (1 1/16 inch) socket. I accessed it from below by removing the front engine bay cover. Got my fingers on the connector and removed it. Got the socket and extensions on it then went up top to get a hand on the ratchet and removed the sensor. If the universal joint flops too much wrap electricians tape around it to stiffen in. I then screwed in the new sensor from below and torqued it down from above. There's limited access but it can be done. A dealer will remove the intake manifold to gain access. NOT NEEDED!. After 70 miles of driving the CE light went out and has been out for a month. FIXED with $700 in my pocket and not some rip off dealership's....CHA CHING!!!

Good chance this applies to many Hondas with the 2.4 ltr engine.
__________________
**We took the time to answer your post. Please give us some time and post the fix. It will help hundreds.
**Follow prescribed safety practices before attempting any procedures. Doubts? Consult a maintenance manual.


07 Fusion / 06 RAV4 / 06 Accord / 96 Gr Caravan
RIP is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Honda > Element

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:13 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts