|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
| Small Engines ATVs Go Karts and Lawn Mowers etc From ATVs to Watercraft, Go karts to Lawn Mowers, discuss your small engines here. |
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Apr 2001
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Landmaster 700 rear brakes
I have a Landmaster 700 UTV with a bad wheel cylinder on the left side. After searching their web site I found the wheel isn't available. The sell the backing plate with the wheel cylinder and shoes mounted for $300.00. Just the (4) rear shoes cost $100 and some change.
I have several junks cars and have decided to adapt the rear rotors for a car to this buggy. The lug pattern is 4 on 100 (4 on 4") with really doesn't matter as I can redrill them to fit my ride. It would be better if it were a four lug since drill the lug pattern could be done between the current ones. I want to use the rear and most has some prevision for an e-brake. What is the smallest rear rotor any has seen on a car? I pulled one from a Honda later yesterday and it's about 10.25". This will not work due to the wheels inside measurement. I could turn the rotor down but I would then need another caliper. Any help would greatly be apprecited. Thanks, Wade |
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
| Thread Tools | |
|
|