 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
01-09-2011, 10:40 AM
|
#1 | |
|
AF Newbie
Join Date: Jan 2011
Location: Los Angeles, California
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
DPRE to EGR Hoses
I went by my Lincoln dealer and parts house in search of the two very narrow hoses that run from the DPRE to the EGR valve. In checking for a vacuum leak I snapped one of them and want to replace both (they are green and red in color). The dealer tells me they are now obsolete. Not good.
 Anyone know where I can get these? I need them to pass smog. |
|
|
|
|
01-09-2011, 03:03 PM
|
#2 | |
|
AF Enthusiast
Join Date: Mar 2008
Location: garner, North Carolina
Posts: 3,579
Thanks: 86
Thanked 100 Times in 100 Posts
|
Re: DPRE to EGR Hoses
There's a graveyard of used parts for the 4.6 TC, I would have no problem replacing both the DPFE sesnor + vaccum hose connections.
|
|
|
|
|
|
01-09-2011, 03:45 PM
|
#3 | |
|
AF Enthusiast
Join Date: Jan 2008
Location: North Royalton, Ohio
Posts: 703
Thanks: 0
Thanked 13 Times in 13 Posts
|
Re: DPRE to EGR Hoses
Junkyard.
__________________
 2000 Mercury Grand Marquis LS - 119k / 14.89s @ 92.11MPH [ pictures | videos ] > Dual Flowmaster Delta 40s / J-Mod / PI Intake Manifold & Cams / Marauder Air Box & 80mm MAF / 3.55 Trac-Lok > Bumper Tuck / Steeda UD Pulleys / CVPI Zip Tube / Ported & Polished Plenum / BBK 70mm TB > BOC 93 Octane Tune / Headlight Relay Upgrade / 17mm rear stabilizer bar / Heinous Aluminum Billet Rear Control Arms > CVPI aluminum driveshaft |
|
|
|
|
|
01-09-2011, 07:20 PM
|
#4 | |
|
AF Enthusiast
Join Date: Jul 2005
Location: Irapuato, Mexico
Posts: 1,456
Thanks: 149
Thanked 85 Times in 83 Posts
|
Re: DPRE to EGR Hoses
If the ends of each hose are OK you can go to any autoparts store and grab some 1/8" rubber hose to replace the nylon part, just leave a small piece of nylon and insert it into the rubber hose at each side, you can use some silicon sealant to make sure you have no leaks. Finally you can try searching at the "vacuum parts" department of the autoparts store, autozne has different nylon hoses and adapters that would definitely do the trick.
Best regards, Oscar.
__________________
1995 Lincoln Town Car 4.6 Signature 1997 Pontiac Grand Prix GT 3.8 2000 Ford Windstar SE 3.8 |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
| Tags |
| dpre , egr , hose , hoses |
 |
| Thread Tools | |
|
|
