2000 S10 Xtreme " in process of being show truck "

[Macstunnah]

SO give me some honest opinions on what you think. All work was done in past 4 months alone.

~ Modifications & Services Performed on the Vehicle ~

~ TYC clear headlight housing.
~ APC euro gen 3 tail lenses.
~ APC Euro diamond clear turn signal lenses.
~ APC Clear 3rd brake light cover.
~ APC Billet antenna.
~ Street Scene "stainless steel" speed grille.
~ Street Scene "Cal Vu" mirrors.
~ Street Scene "fiberglass" roll pan
~ MagnaFlow Stainless steel catback exaust.
~ Chevy xtreme Fog light housings ( were replaced with oem parts ).
~ Goodmark 2inch cowl induction hood.
~ Lebra Tonneu cover.
~ Lowered 3inches all around.
~ Trenz Billet bowtie.
~ Windows tinted 35% all around by bolts auto works.
~ Silver star HID bulbs for high and low beams.
~ New grille retaining clips to replace worn ones.
~ New interior door clips to replace worn ones.
~ Protective car cover for outdoor storage.
~ New lo-profileToyo tires all around.
~ Dante 18inch Vertigo chrome wheels.
~ Duraliner rolled in bedliner.
~ Carbon Fiber wiper blades.
~ Chrome Bullet valve caps.
~ Chrome barb wire license plate surround.
~ Custom marble flame paint job.
~ Mobil 1 5w30 synthetic oil w/ Fram tough guard oil filter.
~ K&N Cold air intake system.
~ Brand new K&N filter for intake to replace old one (new in box).
~ Brand new engine cooling fan in box (never used - needs installed).
~ Optima Yellow top Deep cycle dry cell battery.
~ Bosch 4x platinum Plugs.
~ Bosch Platinum "lifetime" plug wires.
~ Ceramic brake pads in front.
~ Front Brake rotors.
~ Crimestopper Alarm with LCD remote, keyless entry, remote start, and pager.
~ Spare remote for alarm.
~ Fuel filter.
~ Door ajar button ( driver side ).
~ Serpentine Belt.
~ 4 wheel alignment from NTB.
~ Radiator service ( flushed coolant and filled ).
~ Transmission Service ( Flushed, filled, and filter changed ).
~ Tie rod ( driver side ).
~ New Oxygen sensor.
~ 2 tie down straps in bed.
~ Eclipse Head unit.
~ Eclipse Component set ( tweeters and midbass ).
~ Eclipse 4x6in speakers in dash.
~ Eclipse 10in subwoofers behind seats ( 2 total ).
~ Rockford Fosgate 5002 D class amp.
~ Custom built box to house subs and amp.
~ Raptor brand wiring.

[dmbrisket 51]

git rid of those bosch piece of shit plugs, and i dont like the tail lights (just my opinion, you do what you like), get some crystal headlights (they dont have the flutes in them) i absolutly love the paint, even though im not a fan of flames, that looks awsome, not a huge fan of anything cf, but again just a personal preference... couple of questions, why are the door handles still there? and why isn't there a small block in it? why 18's on a show truck, 20's fit fine... and lastly, when the truck wont start some morning, know that its that damn remote start, i was dumb and put one on my show dime, and i see it time and time again, the damn things mess up the starter circuit, overall i like it, a lot, love the cowel hoods, btw if you lowered it 3'', you did one of two things, 1 you realy only lowered it one inch because an extreme factory has a 2'' drop on it, or 2 you lowered it 5'' from stock s 10 height, which is what it looks like you did because your a little lower then me (im on 20's though)

[Macstunnah]

Originally Posted by dmbrisket 51

git rid of those bosch piece of shit plugs, and i dont like the tail lights (just my opinion, you do what you like), get some crystal headlights (they dont have the flutes in them) i absolutly love the paint, even though im not a fan of flames, that looks awsome, not a huge fan of anything cf, but again just a personal preference... couple of questions, why are the door handles still there? and why isn't there a small block in it? why 18's on a show truck, 20's fit fine... and lastly, when the truck wont start some morning, know that its that damn remote start, i was dumb and put one on my show dime, and i see it time and time again, the damn things mess up the starter circuit, overall i like it, a lot, love the cowel hoods, btw if you lowered it 3'', you did one of two things, 1 you realy only lowered it one inch because an extreme factory has a 2'' drop on it, or 2 you lowered it 5'' from stock s 10 height, which is what it looks like you did because your a little lower then me (im on 20's though)

Thanks for the positive feedback on the truck. As for the 18's instead of 20's well i had 20's for it had them bolted up and it rubs like a mofo. SO i kept the 18's cause they sometimes rub on turns and when i hit a bump. SO i will wait to place 22's on when i bag it and cut the wells out and such. As for the handles there still on cause i didn't wanna repaint it yet . But when i roll the rear end and shave that i will do the handles, antenna, wipers and cowl, and a few other things like a front end off a envoy. I will then most likely do a different paint job also then something with atleast 5 colors.. This is just what i have done in the past 4 - 5 months. So there is plenty more to do but gotta get more bank lol... Too many projects going at once.

[dmbrisket 51]

lol tell me about it, and as for shaven the whipers, i dont reccomend it, get one of the high rise cowls, they hide the whipers, and if you unfortunetly get stuck in the rain you can use them (then again im from michigan, and it rains every 15 min. here in the summer lol so i guess it depends on the climet stability of where you live)... one more question, did you buy it painted like that, did you paint it, or did a shop do it for ya??

[Macstunnah]

I bought the truck Black from a autobody place. Then had them do the paint job before i picked the truck up. Then after it was done i was like dammit should have shaved shit would have shaved some of the $$$ of the bill later lol.. I was gonna shave wipers but by then i would be just have it out for show and nice days ... Right now its away in garage also ( winter in PA sucks )