1995-2003 S10 & Blazer Front End Clunk Pop Fix!!! Read!! - Page 12

BlazerLT · #**166** 07-11-2007, 04:13 PM

Quote:

Originally Posted by snoboy

BlazerLT thanks a bunch for showing us this fix. I ordered the washers last week from the dealer and installed them today. I test drove the truck and drove on some choppy stretches of road to double check the washer fix worked! My wife's 2001 Blazer no longer needs an entire front end rebuild. Man you saved my bacon. Thanks again.

snoboy

Glad to have helped you.

mavrim · #**167** 09-06-2007, 03:03 PM

Bravo!

I have had this clunk in my 2000 Blazer ZR2 since it was new. I always felt it was a hinge problem, but never took the time to solve it. I was even thinking it could be something loose under the drivers side dash panel. I will be doing this repair soon!

BeachBlazer · #**168** 01-16-2008, 10:43 AM

Quote:

Originally Posted by BlazerLT

There is the part number listed in this thread.

I suggest reading through this thread, all the info needed is there.

Before I get Flamed....I read the thread (tried dead old links and all

) but I can not find the part number for the washer......anyone mind helping?

Thanks all!

BeachBlazer · #**169** 01-16-2008, 10:50 AM

Quote:

Originally Posted by BeachBlazer

Before I get Flamed....I read the thread (tried dead old links and all

) but I can not find the part number for the washer......anyone mind helping?

Thanks all!

Never mind

....third time looking....many questions with flaming remarks made me miss it....I found it this time

turbotwo1 · #**170** 02-25-2008, 08:06 PM

Bumping an old thread but I just wanted to say thanks. I was about to start ordering parts to try and fix the thumping. But i found this thread, went to the dealer and no more thumps. Now i just have to figure out why its running rough, and I fear that its the spider assembly

BlazerLT · #**171** 02-25-2008, 09:48 PM

Quote:

Originally Posted by turbotwo1

Bumping an old thread but I just wanted to say thanks. I was about to start ordering parts to try and fix the thumping. But i found this thread, went to the dealer and no more thumps. Now i just have to figure out why its running rough, and I fear that its the spider assembly

You are welcome.

If the check engine light is on and the engine won't idle, but will run ok on the road, you have to clean your egr valve which is right under where the plastic intake attaches to the engine.

It will fix the issue.

turbotwo1 · #**172** 02-25-2008, 10:45 PM

No check engine light. It just seems to run rough at idle and it seems to be getting crappy gas milage. I just found out through more research that I might be able to get away with just replaceing the valve instead of the whole spider.

rnisley · #**173** 03-07-2008, 08:18 PM

Will replacing the solinoid for the automatic transmission, be a cure for the transmission not shifting?

BlazerLT · #**174** 03-08-2008, 10:59 AM

Quote:

Originally Posted by turbotwo1

No check engine light. It just seems to run rough at idle and it seems to be getting crappy gas milage. I just found out through more research that I might be able to get away with just replaceing the valve instead of the whole spider.

Yea, the regulator will need to be replaced.

just remember that the longer you drive it like this, the more damge the gas in the oil will do to your engine. I would still remove and clean the egr as well while you have the upper plenum off and replace the EGR gasket.

BlazerLT · #**175** 03-08-2008, 10:59 AM

Quote:

Originally Posted by rnisley

Will replacing the solinoid for the automatic transmission, be a cure for the transmission not shifting?

Please start your own thread on this.

BlazerLT · #**176** 03-13-2008, 07:06 PM

Here is the video uploaded to google.

<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/97PUO-BDM0o&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/97PUO-BDM0o&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>

BlazerLT · #**177** 03-13-2008, 07:07 PM

Weird, here is the link to the video:

http://www.youtube.com/watch?v=97PUO-BDM0o

ZL1power69 · #**178** 03-13-2008, 08:01 PM

LT, is that part still availible at dealers? i'll have to test my truck to see if i have that dreaded rattle.

BlazerLT · #**179** 03-13-2008, 08:02 PM

Quote:

Originally Posted by ZL1power69

LT, is that part still availible at dealers? i'll have to test my truck to see if i have that dreaded rattle.

I can't see why not.

ZL1power69 · #**180** 03-13-2008, 08:10 PM

Quote:

Originally Posted by BlazerLT

I can't see why not.

damn it i was just at the dealer today too, forgot to ask them about it

POST REPLY TO THIS THREAD