Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-26-2024, 03:29 PM | #1 | |
AF Newbie
Join Date: May 2024
Location: Castro Valley, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
VW Beetle 2008 - How do you remove the old plug from the windshield nozzles?
I have a 2008 VW New beetle that seems to have heated wiper nozzles. I cannot get the pluh out frm the socket on the old nozzles to reple them. Is there a catch to this?
Also, it there an easy way to remove the hoze Seems very stiff (I may have pucntured it trying to pull it off.) I have seen some video where there is a clip, but mine just has the hose straight to the nozzles. I may need to try some heat, but getting a hair dryer to the location is not easy... Thanks! Bruce |
|
05-26-2024, 04:13 PM | #2 | |
AF Newbie
Thread starter
Join Date: May 2024
Location: Castro Valley, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: VW Beetle 2008 - How do you remove the old plug from the windshield nozzles?
Ok, after more digging under the hood, I found that the actaul plug is about 4 inches into the hood, and not on the nozzle!
It also looks like I did puncture the hose, and that there may have been other leaks as there are pinholes in places I did not touch. It looks like there is a hoze connexcttor about the same place as the wire connector is, but I cannot find a part number for this lille peice of hose that has theconnector. Is there a part number for this connector? or this short hose assmebly? Thanks in advance! Bruce |
|
|
POST REPLY TO THIS THREAD |
Tags |
2008 , beetle , heated , nozzle |
Thread Tools | |
|
|