 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
03-23-2025, 09:54 PM
|
#1 | |
|
AF Newbie
Join Date: May 2008
Location: Regina
Posts: 83
Thanks: 6
Thanked 2 Times in 2 Posts
|
1990 Park Ave cruise control wires
Hello everyone. Have been absent for some time.
Still driving the Buick. Have a question regarding the cruise wiring at the control. A red wire has come off and when last used it seems using the button on the end of the signal switch does not slow the vehicle. It must be related to that loose wire. Is it possible to disassemble the signal lever and reattach the wire? (edited to correct spelling and picture) |
|
|
|
|
03-24-2025, 07:29 AM
|
#2 | |
|
A990 racer
 Join Date: Mar 2002
Location: Chestertown, New York
Posts: 17,025
Thanks: 26
Thanked 381 Times in 372 Posts
|
Re: 1990 Park Ave cruise control wires
If it is broken off inside the lever, no.
__________________
|
|
|
|
|
|
03-24-2025, 09:23 AM
|
#3 | ||
|
AF Newbie
Thread starter
Join Date: May 2008
Location: Regina
Posts: 83
Thanks: 6
Thanked 2 Times in 2 Posts
|
Re: 1990 Park Ave cruise control wires
Quote:
Thanks for your reply. Yes it is. I was hoping there was a method to open it. Off to search for another steering column. What models outside of the PA may have the same column? There is a 1991 Buick La Sabre?? at a local wrecker. I'd have to pull the steering column to do comparison |
||
|
|
|
|
03-24-2025, 11:33 AM
|
#4 | |
|
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 17,025
Thanks: 26
Thanked 381 Times in 372 Posts
|
Re: 1990 Park Ave cruise control wires
Is that broken wire from the handle or the harness down the column? If in the column, you be able to fix it if you can reach it.
__________________
|
|
|
|
|
|
03-24-2025, 04:59 PM
|
#5 | |
|
AF Newbie
Thread starter
Join Date: May 2008
Location: Regina
Posts: 83
Thanks: 6
Thanked 2 Times in 2 Posts
|
Re: 1990 Park Ave cruise control wires
No the broken wire is right at the control lever. Bad luck today. The 1992 Buick I hoped to salvage the column has a signal broken lever. It's pulled out and bent. I brought it home and was able to straighten it but can they be interchanged? See the picture attached.
|
|
|
|
|
|
03-24-2025, 05:15 PM
|
#6 | |
|
AF Newbie
Thread starter
Join Date: May 2008
Location: Regina
Posts: 83
Thanks: 6
Thanked 2 Times in 2 Posts
|
Re: 1990 Park Ave cruise control wires
No picture??
|
|
|
|
|
|
03-25-2025, 07:23 AM
|
#7 | |
|
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 17,025
Thanks: 26
Thanked 381 Times in 372 Posts
|
Re: 1990 Park Ave cruise control wires
Gonna be tough, can't hurt to try.
__________________
|
|
|
|
|
|
03-25-2025, 09:28 AM
|
#8 | ||
|
AF Newbie
Thread starter
Join Date: May 2008
Location: Regina
Posts: 83
Thanks: 6
Thanked 2 Times in 2 Posts
|
Re: 1990 Park Ave cruise control wires
Quote:
Well guess what. The lever pulls out. I found this pdf. Inside the GM Tilt Steering Column By: JAZZMAN And to think I've spent all this time removing the steering column and hunting the scrap yard. Not done yet but there is hope. Quite a learning experience. Thank you internet. |
||
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
