Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-07-2009, 12:28 PM | #1 | |
AF Newbie
Join Date: Jun 2005
Location: Pfafftown, North Carolina
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
2000 3.0 24v hard to start wagon.
My 2000 3.0 24v wagon is difficult to start about 75% of time. In the past year
have replaced the fuel pump, crank position sensor, and camshaft position sensor. The problem happens for cold and sometimes warm starts both. Engine runs fine after starting. Running out of options, any help? Thanks |
|
07-07-2009, 01:05 PM | #2 | |
SHO No Mo
Join Date: Jun 2004
Location: Cedar Rapids, Iowa
Posts: 10,979
Thanks: 103
Thanked 354 Times in 347 Posts
|
Re: 2000 3.0 24v hard to start wagon.
Welcome to the forum!
Have you tried holding the throttle slightly open when starting? Maybe the throttle plate is carboned up and/or the IAC is not functioning properly. Also, what is the fuel pressure when the car won't start easily? -Rod |
|
07-07-2009, 01:12 PM | #3 | |
AF Newbie
Thread starter
Join Date: Jun 2005
Location: Pfafftown, North Carolina
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2000 3.0 24v hard to start wagon.
Thanks for the response.
I have checked and cleaned the IAC, and the entire throttle plate/body mechanisms. The pressure bleed valve ejects a strong stream of fuel from the fuel line although I have not done a pressure check. The fuel pump was one of the first things suspected and replaced some time back. Last edited by Tglass; 07-07-2009 at 01:20 PM. Reason: misspell |
|
07-07-2009, 01:54 PM | #4 | ||
SHO No Mo
Join Date: Jun 2004
Location: Cedar Rapids, Iowa
Posts: 10,979
Thanks: 103
Thanked 354 Times in 347 Posts
|
Re: 2000 3.0 24v hard to start wagon.
Quote:
Were you parts you mentioned in your original post all replaced because of this issue? -Rod |
||
07-07-2009, 03:26 PM | #5 | |
AF Newbie
Thread starter
Join Date: Jun 2005
Location: Pfafftown, North Carolina
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 2000 3.0 24v hard to start wagon.
Ok, I'll get a guage and check the pressure.
Can't be certain so I'll have to check, but I believe the filter was changed. I did not do that job myself. The others I did. Thanks again Tom |
|
|
POST REPLY TO THIS THREAD |
Tags |
24v , 3.0 , hard , starting , wagon |
Thread Tools | |
|
|