Keyless Entry Info...Search here first before posting about keyless entry problems.

[yobry1]

Newbie here, how do I start a new thread? I have searched the entire website for how to start a new thread or ask a question. Other forums I belong to have a Post Question button or Start New Thread button.
2. I have a 94 Lumina Sedan trying to program Keyless remote and cannot find anything here nor Google search about 94 Lumina Sedan, as if the 94 sedan never had keyless entry. I have found info on Lumina APV. I need to locate the receiver to program my remote.
Thanx in Advance

[babygirl0803]

I have a 2002 chevy tahoe and my keyless entry just quit i tried the turn off and on then unlock it all worked but after that i tried to use the remote and it didnt work what do i need to do?

[zorrocom]

Need help programming a remote bought on ebay for Dodge Neon 2004.I never had an original remote as car was bought w/out one .I also have Equus code reader/scanner if needed. Thanks

[williams1949]

anyone have any info on a 2000 Dodge Caravan Sport...need keyless entry info if possible. Thanks

[TyGrrrr]

Heya folks,

I've searched this thread for the appropriate response but nada so I thought I'd ask. I apologize if I missed it tho...

Is it possible to reprogram the keyfob from a 2001 Chev Cavalier to work on a 2002 Chev Cavlier myself? Is there any code I can use or izzit a matter of bringing it to the dealer and paying an arm-and-a-leg for a couple minutes' work?

Any help is greatly appreciated. Thanks!

-TyGrrrr/Dana

[urtdog31]

Hello...Ok I just brought a 99 tahoe and it came with no keyless entry remote, so I figured I'll go on ebay and buy another before some crackhead steals my truck, I searched this forum and found the programming instructions, (which is great) I would like to know is what is the 4 and 8 pin that is being spoke about, where is it and what does it look like, I'm going to do the programming I don't want to be touching something that I should not be touching at all.

[Sheldog1]

Anyone here know how to program a remote for a 1996 cavalier? Any help would be appriciated.

[Sheldog1]

does anyone have the programing for a 1996 cavalier? Been every where on the web and can't find them.

[rnj]

Can't find info on finding out if my 97 olds 88 came with keylss as an option. anyone know how I can tell?

[urtdog31]

Ok I have the replacement remote for my 99 tahoe, and I tried the instructions that was giving for reprogramming it, it didn't work, can someone help me, trying not to take my truck to the dealer to do something that I can do myself, I also want to know do I need any tools to do the reprogramming??

[edmond]

Does somebody know how to program the remote for the 97 Pontiac grand am se??

[GilP]

I can not find reference to my problem but, being new to this, Imay be in the wrong place.

I have a 2005 Silverado crew cab. Using the door key twice opened all 4 doors until a few days ago. Now it only opens the driver's door. What to do?

Thanks for any help.

[ctp02suburban]

My remote receiver on my 2002 Suburban went dead. The dealer wanted about $350 to repair and would not help me in locating the receiver. I spent countless hours searching the web with not much luck. I finally found a privately-owned GM repair shop that shared a diagram and I was able to located and repair the receiver quite easily. I bought the part online for about $70 (including shipping). Dealer wanted ($125).
Repair Process - Tilt your steering wheel down, put the car in low gear to get the shifter out of your way(you may want to apply the parking break). Pry off the large trim piece that surrounds the gauges, speedometer, radio, etc. This is held on by tension clips, use a flat screwdriver, etc to get it started and just carefully give a firm pull . Once this is removed, 4 screws hold the contained speedomoter/gauges in place, remove the screws and slide the gauges off to the left side (the cord is long enough to allow this). You will see the keyless remote receiver mounted (clipped) to some metal just below the dashboard, slightly to the right of the steering wheel and slightly above the gauges that you just removed. It just pops off, plug the new one in and replace the pieces and follow the reprogramming instructions that are located elsewhere on this AA forum. The total process took me less than 30 minutes. The keyless receiver part number for mine is a very common #15042969 but I would confrim that before doing the repair. Order from www.gmpartsdirect.com.

[frank335]

Can anyone out there help me with the programming procedure for a keyless remote (KOBLEAR1XT) for my 2003 Astrovan?

I have one working unit, just looking for a backup. (my wife tends to loose these things)

TIA

[latunguley]

Yes i know that you can program these key fobs yourself. It may take a few trys at it but sooner or later you can get them right. My question of this matter would be is it possible to remove a keyless entry/alarm from another s-10 blazer and re-install it to a non-keyless entry/alarm s-10 blazer? I own a 2000 S-10 Blazer with factory installed power door locks without factory alarm/keyless entry. I have noticed countless times among various salvage yards that s blazers that had the parts I.D. (AU3) instead of (AU0) in the glove box were missing the BCM. And the Blazers with (AU0) still had their BCM untouched. My theory is yes this may be able to be completed.