14.8 1/4 mile with my mods and have a? - Page 2

91talondsm · #16 03-04-2008, 08:04 PM

turbos brand new and just pulled the intake tube off yesterday and checked for oil or shaft play and there was neather.
just bot the car really and also found out that all the exhaust manifold bolts were loose so i tightened them down and turbos louder but still hit the 15psi mark with no creep.

91talondsm · #17 03-04-2008, 08:07 PM

i was able to hit 30psi on the 14b without fuel cut with those injectors.

steviek · #18 03-04-2008, 08:14 PM

awe come on dude
the 14b will not make 30 psi. And I have logs of my Injector duty cycle with 720 cc injectors running at 90%+ on the e316g so I dunno about that one.

steviek · #19 03-04-2008, 08:20 PM

Just to prove
23psi e316g 720 cc's
90.9% IDC
Now tell me what IDC that would be on 450's?

91talondsm · #20 03-04-2008, 09:43 PM

maybe it wasnt 30 but i have a aftermarket boost guage and it would spike past the 20psi mark real quick, so could have been like 25psi, and was a hell of alot faster than my car now at 15psi

rock0134 · #21 03-05-2008, 09:24 AM

yea maybe it wasn't 30 psi

91talondsm · #22 03-05-2008, 03:52 PM

well looks like i got jiped on the turbo cause i just got done looking at my brand new turbo and the turbine fins are broke and bent,so i guess thats why im only hitting 15psi. bought it off ebay from cx racing for 300$. they better give me a new one.

steviek · #23 03-05-2008, 04:34 PM

I doubt they will they are pretty cheap like that.
I will be taking my e3 off for the fp turbo I got soon It might be available if you want to wait for a little bit

91talondsm · #24 03-05-2008, 05:13 PM

i just need the compressor wheel, the rest of its still new.found one for $40 but guess where? yup ebay, its a japan site thow so i might trust it.

Thor06 · #25 03-05-2008, 05:52 PM

Dude, dont even bother. Ebay turbos are shit, even if you did get a new compressor wheel put on and got it balanced, something else would shit the bed later. Just get a respectable turbo.

91talondsm · #26 03-05-2008, 08:13 PM

well wish i would have read your post first. i just ordered a greddy compressor wheel and a rebuild kit for the turbo.

http://www.gpopshop.com/mitsubishikits.html got complete rebuild kit here. (TD05H complete kit)

http://cgi.ebay.com/ebaymotors/ws/eB...ksid=p3907.m29

heres the compressor wheel.

91talondsm · #27 03-06-2008, 10:45 PM

talked to keven from cx racing he said they stand by there products and would give me another one for 100$ including shipping. im gonna take it cause it beats the 215$ rebuild kit.

steviek · #28 03-06-2008, 11:23 PM

yea i would too and just hope that one holds out for a while.

Thor06 · #29 03-07-2008, 01:00 AM

Why is $100 for another piece of shit turbo a good deal? If some moron was standing on a street corner selling condoms made of saran wrap and rubber bands for the low low price of $.50 instead of the $.75 for Trojans and yours failed which got your chick pregnant, would you take another from him if he "stands by his product" and gives you another for $.20?

I told you and I am sure everyone here agrees with me, the turbo you have now and the turbo you will be getting are both complete crap. Forget about the rebuild, tell that gay wad to stuff their epoxied turbos up his ass, and buy a decent turbo.

steviek · #30 03-07-2008, 01:16 AM

but that still leaves him with no turbo and footing the bill of the first. It is arguable either way maybe it was a bad apple but I am sure if this one goes than they are all shit. But maybe he will do soemthing else for you when you tell him his turblows suck.

POST REPLY TO THIS THREAD