Complete; 2004 Yamaha M1 Rossi

[The Sheene Machine]

Originally Posted by proosen

Wonderful build!

Looks fabuluos, one question to help me on my way.
How was the Zero-paint to work with?
I just got me a bottle of Lamborghini's Arancio Atlas from Zero and wonders if there is anything special to think about with this paint brand?

Thank's for the peek.
Niclas

I had no problems with the paint. Remember you have a base paint - so you may not get the final colour until you apply clear over it. This was the case with the M1 blue, it has a purple tint to it and only goes blue with clear. If you have the 60ml bottle - you'll do 2 bodies with it. I just shot my last lot of M1 blue on my second bike and still have a little left. I applied my paint at 30psi, about 3 coats with that colour and I did not need to thin it. I shot the clear about 30 minutes after. Highly recommended.

[The Sheene Machine]

Originally Posted by CHIPPY06

Ithink the last time i see this you were busy polishing it at farnborough .
Looks stunning once again hope to see it at the next show

Thanks Ady. I'll be at Yeovilton in Feb, then Modelsport in March.

[proosen]

Originally Posted by The Sheene Machine

I had no problems with the paint. Remember you have a base paint - so you may not get the final colour until you apply clear over it. This was the case with the M1 blue, it has a purple tint to it and only goes blue with clear. If you have the 60ml bottle - you'll do 2 bodies with it. I just shot my last lot of M1 blue on my second bike and still have a little left. I applied my paint at 30psi, about 3 coats with that colour and I did not need to thin it. I shot the clear about 30 minutes after. Highly recommended.

Thank you for the input on the paint, I'm really looking forward to use it but still is a bit from getting to the paint session.


Niclas