TypeKoshiR Civic is ready

[emil13si]

You won't belive it but I made it I swaped the 6th gen civic dash into my civic with little modifications done on the frame and a lot of modiffication done on the air system :0( that air system sucked big time and took me lots of time to modifeid it...
But it's in :0) I'll take photos and show it how it looks like...

[91civichatch2571]

take the photos now!!! it must look real good

[emil13si]

O.K. I'll take them later today when I'll go finish that dash swap ;0)

CYA

[emil13si]

Here they are
Photos of 6th gen dash in my civic
(I know one oiece is still missing I'll get it soon, and I need to clean it this photos were taken right after installing it in)















And the last one me startig the car :0)



What do you think !?

[Jetts]

very cool man

[GTA]

looks good, how about some more engine shots

[Jay eS Iye]

how hard was hte dash conversion?

[ci5ic]

Nice!

How well does the dash match up with the door panels? Could you gets some pics of that? I noticed that the new dash doesn't have the air-ducts for the door-mounted window vents...

[emil13si]

I'll take some more photos as soon as I can and I'll post it so you'll see how it looks now I put in the tacho and those three autometer gauges I was tellin' a while ago....
That air vents are the trickiest part, all I did was modify the one that is going to the front window cause that one is must be, the others are just to tricky to do in so short time maybe some day I'll do the conectors ftom orig to new dash from poliester...all I need to do now is modify door panels but we'll prolly do them from CF cause my friend is totally amaized about it

I'll post some new photos tomorrow

CYA
Emil

[Killa_CRX]

Damnit... you gave me an insane idea... since I can't get my 91 running, I just had the insane thought that I could strip my Del Sol VTEC completely down, use all the engine, electronics, wiring, ect... convert it over to my 91 and have a perfectly running Bseries engine in my 91 Civic...
isn't that a silly idea!?

[Jetts]

kinda a waste

[emil13si]

O.K. we finally dynoed it...
You won't belive it with Skunk2 chip in the ECU we gain a 167HP at aprox 6500rpm then it was goin down low and the rpm limit in that chip is on 9200rpm :0( BAD choice
So we put STOCK b16a2 obd1 ECU in and we gain out 176HP at aprox 7800rpm...
So what we need to do now is put on the 4-1 JUN header that I'm waiting to get from States and then took it back to dyno and chip the ECU on dyno and then we'll see the real resaults that we gain from tuning...
We were runing on stock 98 octane gas, next time we'll put in the real gas cause the compression is a bit high in the engine and after the dyno I add some octane booster and the
car didn't knock that bad anymore...
So in a week or two we'll do that DYNO and ECU preprograming and then I'll post new numbers

CYA

[Przemir4g]

osome work !! looks very nice and ride like hell

[Civic Jim]

good work mate, im loving the dash, 100% great work

[BLU CIVIC]

nice....