How to program a remote key Fob?

[2octops]

Originally Posted by FixUrNissan

Sorry there is no trick i can share when it comes to keys..If you want to program the Key, your going to have to take it to the dealer, The Scan tool has to be used to program that. Also bring "ALL" your keys , any key you don't bring will no longer work

Most locksmiths that do a lot of automotive work also have the equipment to program these keys. We used to have to purchase the dealer tools for this, but in the past 4 or 5 years, there have been a lot of advancements. Now there are several handheld tools on the market that will program keys to most of the vehicles on the road today.

[blakinc]

Originally Posted by ittefaq

Thanks anyways, I guess I will have to go to the dealer now.

Don't go to a dealer until you contacted a locksmith. I being a licensed locksmith hate to see you guys blow excessive amounts of dough without checking out your options. If you don't know of a local locksmith who can program your remotes or keys, email me [email protected] and I'll find one for you.

[Brent1025]

I am looking for programming of a key fob for an 03 silverado 1500 wiht push button locks

[Brent1025]

[quote=Brent1025]I am looking for programming of a key fob for an 03 silverado 1500 with push button locks. thank you/quote]

[teammetal]

Does anyone know how to program my remote for my 2003 chevy express 3500 van? Thanks

[Sarahbearah]

Try this site. They have instructions for most vehicles.

http://www.programyourremote.com/

[2006 Volvo S40]

hello
i just got a new fob for my 2006 volvo s40 does anyone know how to program it??

please email

[email protected]

thanks

: )

[mtpromises]

I have a 2005 Buick Lacrosse. I need to program a key fob to the car, How do I do this?

Thanks

[lacava5]

Does anyone know how to program a remote for a 2003 Dodge Viper or any other 2003 Dodge?

[ectpm]

Hey I have a nissan xterra 2000 will all nissan oem remotes work on all compatible nissans? and on mine will the trunk button work? does this also work as an alarm, because i opened my back door (suv trunk) and it was beeping at me. Any info I should know about this paticular model/recalls? I just bought this so anything will be grateful.

[Jroumell]

I need the programming instructions for the remote on my 2005 Chev trailblazer. Part GM15008008. Can anyone help me out?

[suzuky23]

Re Re 05 nissan altima Key fob!!! Wow Thank's For The Tip I Just Did it Took Me Just 3 Minutes , Super Easy !!!!!! Thank's Again !!!

[InfinityLady]

I just replaced the battery for my remote and I have tried the this programming procedure a few times for my 2001 QX4...I get through the in and out of the ignition and the hazards flash...However, nothing happens after I insert the key into the ignition and turn onto ACC or the ON position and then press a button on the remote...I believe the hazards are supposed to flash at that point...But they do not and the remote does not work to open the doors...Is there anything else i can try?....How would i know if it is the remote I have to replace?

[Abu Dawood]

Any ideas on how to programme a fob for Nissan Almera Tino? I've tried the following but it didn't work.

Unlock all doors, insert key into ignition, turn key from 0 to on 6 times within 10 seconds, waited 2 seconds for lights to flash, pressed lock button 3 times while holding onto unlock button...after that I've had no response.

Please let me know if you have a possible answer.

Thanks

[jonathan 11]

I need to program my key remote for my 97 Maxima. The only problem is i had to change my ignition key due to a car theft. Is there a way to re program the remote even though i changed the ignition key? I followed the steps of locking the doors and then inserting the key into the ignition and removing it quickly 6 to 10 times but my hazards never flashed so i could not repeat the other steps.can anyone help me with my problem?