overpaying?

[SiZ]

11+ year old oil pumps break, a lot!

Use an online phone book and look up these places in Toronto, Ontario here in Canada.
These are there prices for complete 2nd gen B16A swaps, so I'm sure the 1st gen shops are cheaper.
Best Japanese Auto Parts..$2600
A.J. Japanese Auto Parts...$2500
Tokyo Auto Parts.................$2400
J.K. Auto Parts.....................$2800
Tiger Auto Parts...................$2800

[crx91]

www.passwordjdm.com
try them.

[4G4D Store]

I'd say good luck for under $1500, I deal with wholesale, and for a reliable GOOD B16 that's been tested and stuff you are looking at $1000, maybe $900 on a very good day, then about $400 for mounts, $150 for shift linkage, prolly andother $100-$200 for axles (if you need them), then you have labor on top of that (unless you are installing it yourself). So lets recap - at the minimum on the best day would be $1600+shipping+labor, on a normal day about $1850+shipping+labor, and on a bad day over $2000+shipping+labor.

[Killa_CRX]

$2500 is not a bad price to shoot for if that's mounts, shift linkage, motor, transmission, ecu and all that good stuff.... also might want to add to the cost, new timing belt, water pump, oil pump, have the alternator rebuilt, put on some new gaskets... just little things that do make a difference.

[travagliante]

www.flashoptions.com

$1000 BUCKS!!!!

One homepage link. They are on SALE!!!

oh my paypal add. is [email protected]

Same place my friend got his from. Very reliable and worked great!!

[civicHBsi91]

man why waster your money on a b16 get a single cam zc stupid!

[Kunundrum]

check out the link in my signature

[lilol89crx]

www.importautosalvage.com contact them, thats where we got a b16 with a y1 tranny. we got it with factory mounts but only paid 1250. then hit up ebay for the mounts.....u could also buy a front clip from them for about 2100.

[SiZ]

Here's a guy in Ontario thats selling everything you need for the swap + for $2750cdn. Thats 2,021.32 USD.


http://forums.clubsi.com/showflat.ph...5&o=31&fpart=1

[Ace$nyper]

wow thanks for all the great replys! i'm going to look into all of them and see what works best i'll dig this thread up to thank*coughpayoffcough* the winner if i use youre ideas!
Hey what can i say info is the most worth while thing out there

[travagliante]

yeah i sound the cheapers though....


hahah


hey you could get the front clip for like 1500 and weld it on to your front and have RHD...lol

good luck on whatever you do

cough cough dont forget me cough cough