Keyless Entry Info...Search here first before posting about keyless entry problems.

[lhcollings]

My locks would lock and unlock while driving done the road. I replaced the remote and the RKE module . Now i need to sychronize them both the module and the remote. I tried the on -off method -nothing. Please help

[bambamyum]

I have a 1999 Chevy Venture van with the remote keyless entry system. One of the remotes stoped working so I purchased a new one and need to add it in. Does anyone know the procedure to go through to add a remote in for this vehicle?

[koster]

where do i install the remote module into the 2000 pontiac grand am.
it is the same one as the dealer would sell... but i just want to know where to plug it in (install it) etc.. before i get it.. so i'm ready. it should come in a couple days.

thanks!

Originally Posted by sasteve2002

I just got a new remote to replace a broken one, deos anyone know how to program on this vehicle? 1997 malibu 3.1? thanks in advance.

This is for my 1998 Malibu

ABO1502T

This is how I did it..and it worked! Saved $35!

Look in right side wall of trunk..there's a wire taped to another wire that has a plug on it with two prongs. I used my key, yes, my ignition key to jump the plug..I inserted the key between the two prongs and turned so that the key touched both prongs. My car cycled, unlock, lock, trunk release, unlock, lock, trunk release, horn chirp...while keeping the key in place, push (or have someone else do it) the lock and unlock buttons on your remote at the same time for about 12 seconds..you should hear the car lock/unlock. Remove key from plug. Your remote should now be operable. I only had one remote, so if you have more than one, I'd either try repeating the entire process for each remote, or doing each remote one after the other while keeping the key in the plug. I dunno, but if you figure it out, let me know!

<3 Deborah <3

PS- my ignition key has a rubber head! Don't electrocute yourself!

[dbisknot2ez24get]

i have a factory keyless remote that works great at unlocking and locking the doors on my 2000 malibu, however it does not chime or flash the parking lights no matter what combination of buttons are pressed. Does anyone know if there is a resolution to this issue?

On my remote (1998) if I press lock twice, the horn chirps, my lights do not blink though. When I press unlock, it turns my interior lights on. It unlocks and locks the doors, pops the trunk..thats about it! But I have the 3 button ABO1502T..check your owners manual.

[kukaracha]

I have an '03 Avalanche and just got a GM Accessories VSL4000 alarm system off ebay and it has 2 remotes. Is there any way for the remotes to remember my car seat memory, radio presets and mirrors like the factory remotes did? And if so, how do I do it? Other question is since it's a GM part, can I simply unplug the factory security system and plug this one in?

Thanks

[tweetyboat]

Hi guys
I just got my 2002 2500 4x4 Avalanche and i need to programm a new entry remote. Please help...

[REugene]

Lost a remote and replaced it. I have read the posts and know I have to program all at once. But, do the post for 99-02 GM work for my truck? Also is the posted diagram correct for mine if I have to use the 4 and 8 pin to prgram. Any and all help is needed and appreciated. Thanks Eugene

[tahoe2720]

I've just purchased a 2000 tahoe z71(the old body style). It came with one remote, thats definately not made by GM.

I have an old remote from my 99 chevy blazer, and from a 96 chevy blazer. Is their any way I can use one of these remotes for my tahoe?

I've tried all sorts of methods listed on this thread to program the recievers.

I can't find the "DOC", nor do i know what the hell that is, or else i would of tried the "grounding pin a to pin g" method.

I guess my questions are:

How do i find out if my tahoe was even equipped with remote entry?
Where is the DOC?
Can i use my old keyless entry remotes?

Any other help would be appreciated.

Eric

[jerky]

95 monte carlo, would any one know the programing instuctions for a new remote,
thanks.

[toolman571]

I need help to program my extra remote I bought from ebay..1996 Monte Carlo I dont have access to a scan tool..Thanks

I used the wire in the trunk. just ground it and the locks will cycle lock and unclock, press the remote buttons at the same time and it will program the remote, do the same with your other one...

[ricpope]

have a 96 blazer, not born with keyless. what parts do i nned, and how do i install them?

[toolman571]

Originally Posted by ricpope

have a 96 blazer, not born with keyless. what parts do i nned, and how do i install them?

I dont know what you can do with a factory unit.. But you can go to best buy or hh greg and they have a keyless entry w/remote start also included is an alarm.. I put one on my 97 Blazer and my 94 astro van.. they work perfect...Toolman571

[ricpope]

i have the remote function actuation module gm 16244084 from a 97 blazer. (junk yard) where is the connector for the box?
i removed the three bolts on the lower panel and there was nothing to plug it to. any help would be greatly appreciated.