|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
03 GMC Sierra 2500 6.0L No Crank
I bought a std cab 4wd Sierra with most of the interior taken apart. Most of the major components are reinstalled, but the drivers air bag is missing. There is a blue connector in the left parking brake area with a clamp, but missing the mating item. There were a few shorts under the fusebox under the hood. I have repaired those wires. The parking lights turn on, but not the headlights. The radio works, but the security light is on and it does not crank. I checked the fuses under the hood and the crank fuse in the left instrument panel. I am heading to a junkyard to find what is missing in the emergency brake area. I bought the OEM Service Manuals and verified the BSM and ECM are installed and connected. I have changed the gear selector from park to 1st gear while attempting to crank. Its a project truck, but I need to get it started to move. Any helpful suggestions would be appreciated.
|
|
#2
|
||||
|
||||
|
Re: 03 GMC Sierra 2500 6.0L No Crank
Burt,
maybe something as simple as starter relay?? under hood fuse box; could swap a horn or AC relay, or see if terminal 30 is hot; and just jumper wire 30 to 87, should crank.. |
|
#3
|
|||
|
|||
|
Re: 03 GMC Sierra 2500 6.0L No Crank
Not gonna crank with security lite on.
__________________
|
|
#4
|
||||
|
||||
|
Re: 03 GMC Sierra 2500 6.0L No Crank
If it's a VATS issue, which it sounds like it is, you may either have to try to find a bypass or possibly even replace the ignition lock cylinder.
__________________
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|