89 Beretta 2.8 fuel injector ohms?

[jklatik]

Hey all, it’s me again. after thinking i fixed the problem it still dies after getting to operating temp. So I decided to check the fuel injector ohms. Injectors 1, 3 and 6 are reading 12.4 ohms and 2,4 and 5 read 6.5, 7.3 and 8.9. Would this cause it to die after getting to operating temp. i took the reading warm and cold. When warm the only injector to maintain a 12.4 reading was #6 the rest were between 6.4 and 8 ohms. This is getting old! Also the wire harness seems to be hard and brittle, with one plug spliced, so that i will replace since the plenum is off. Thanks for the help.

[jdl]

How long since a tune-up? Any applicable trouble codes? Replace injectors. You can do amp test, injector ground at pcm, key on. Should not be more than .75amp.