|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
12-14-2010, 09:05 PM
|
|||
|
|||
|
please tell me......
Is there a EASY way to remove the top nut off the rear shock
on a 1999 crown vic? very little room to work here. no way though trunk or seat to help out (I checked) any help is welcome.....and I thank you. 
|
|
#2
12-15-2010, 07:29 AM
|
||||
|
||||
|
Re: please tell me......
We made our own wrench with a ratchetiong box end and welded a long metal handle on it. Makes it a little easier.
__________________
Being way2old is why I need help from younger minds The sooner you fall behind the more time you'll have to catch up.  HEY Y'ALL--READ THIS Here are some of our old vehicles for sale. 
|
|
#3
12-15-2010, 11:14 AM
|
|||
|
|||
|
Re: please tell me......
Thanks for the reply way2old. I did just that yesterday (used hose clamps) and it worked.
I also removed the tire so I could get in a little better. I paid for my shocks at a auto parts place and checked around to have them put on. $185.00 to $220.00 was what I had tossed at me. Now I saved enough to fill my tank.
|
|
#4
12-15-2010, 03:04 PM
|
||||
|
||||
|
Re: please tell me......
I ran into that same problem. Mine were seized on there enough that they had to be cut off. I took it to a local shop and they replaced all 4 for me for $50 labor. I provided the parts.
__________________
 2000 Mercury Grand Marquis LS - 119k / 14.89s @ 92.11MPH [ pictures | videos ] > Dual Flowmaster Delta 40s / J-Mod / PI Intake Manifold & Cams / Marauder Air Box & 80mm MAF / 3.55 Trac-Lok > Bumper Tuck / Steeda UD Pulleys / CVPI Zip Tube / Ported & Polished Plenum / BBK 70mm TB > BOC 93 Octane Tune / Headlight Relay Upgrade / 17mm rear stabilizer bar / Heinous Aluminum Billet Rear Control Arms > CVPI aluminum driveshaft
|
| |||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
