|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
06-07-2010, 09:02 PM
|
|||
|
|||
|
03 2.7 ac problem
I am working on a 03 santa fe 2.7. It has plenty of freon but when you turn the switch on ac the compressor never turns on. I can reach down and turn the clutch by hand. I have checked all fuses and I have power going to the compressor at that plug and probed the wire right before it goes in the compressor and have power their. Does that mean the compressor is bad. If not what else to check and how to check it.
Thanks in advance 
|
|
#2
06-08-2010, 05:43 PM
|
|||
|
|||
|
Re: 03 2.7 ac problem
If there is power to the A/C compressor clutch but it's not engaging, the most likely problem is a bad clutch. Make sure you also have a good ground connection.
__________________
Paw-paw Don, y'all ______________________________________________ Favorite saying: "One need never apologize for exercising the Golden Rule"
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
