|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
01-04-2010, 08:47 PM
|
|||
|
|||
Need help 97 2.2 front pulley bracket
Looking for any help on a diagram for the front bracket on the 97 s-10 2.2. My fan is all wabbley, and a bit loud. Saw one posting on DIY site were the fan actually spins off and causes major damage. something I would like to avoid. My mechanic has ALL-DATA, still couldn't find a name for this whole unit. everything on the front bolts to this. Help!! thanks in advance...
Last edited by salon1978; 01-04-2010 at 08:47 PM. Reason: leftout word 
|
|
#2
01-05-2010, 10:36 AM
|
||||
|
||||
|
Re: Need help 97 2.2 front pulley bracket
What pulley bracket?
Fan to water pump? Is it the fan blades that are lose?
__________________
Remember proper testing gives us the answer to many problems. MT
|
|
#3
01-05-2010, 10:48 AM
|
|||
|
|||
|
Re: Need help 97 2.2 front pulley bracket
you need to replace that fan bracket
the bearing go bad in them it looks just like a water pump hub but it's just a pulley hub the water pump is next to it. Dorman sells one that is a lot cheaper then the dealer here's the part #300-807 you can buy at most parts stores.
|
|
|
POST REPLY TO THIS THREAD |
| Tags |
| fan , pulley , s-10 |
 |
|
|
