|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
| Cutlass Series Includes Cutlass Ciera, Cutlass Cruiser, Cutlass Calais, Cutlass Supreme, Custom Cruiser, as well as the GM N-Body subforums. |
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Sep 2009
Location: Port Moody
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
1990 Cutlass Ciera : Oil on manifold
This is a 3.3 Auto.
I am not at all experience to excuse me. There appears to be oil on the front exhaust manifold ( nearest to the oil filler cap ) I have only recently aquired the car, is it possible the previous owner overfilled? Or am I into serious problems here? I am capable of simple to moderate servicing, but it this is an engine strip down it is likely beyond my skills and budget. Thanks in advance. |
|
|
|
|
|
|
#2 | |
|
AF Newbie
Thread starter
Join Date: Sep 2009
Location: Port Moody
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1990 Cutlass Ciera : Oil on manifold
An update.
looks like a leaking gasket on the rocker cover. So not the end of the world. |
|
|
|
|
|
|
#3 | |
|
AF Newbie
Join Date: Sep 2009
Location: Raleigh, North Carolina
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1990 Cutlass Ciera : Oil on manifold
The 1990 3.1L was the first year bult without a distributor(elec Ing).
There is a plug with an O-ring in the hole where the distributor shaft used to go. Check there for the leak. There is one 1/2" bolt holding the plug in place. Very easy to see and replace. (Home repair cost $2.50 time 1 Hour) |
|
|
|
|
|
|
#4 | |
|
AF Newbie
Thread starter
Join Date: Sep 2009
Location: Port Moody
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1990 Cutlass Ciera : Oil on manifold
Soft top, many thanks for that advice.
|
|
|
|
|
|
|
#5 | |
|
AF Regular
![]() Join Date: Oct 2003
Posts: 175
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1990 Cutlass Ciera : Oil on manifold
Old thread, but that's for the 3.1 only. The 3300 doesn't have provisions for a dist
|
|
|
|
|
|
|
#6 | |
|
A990 racer
![]() Join Date: Mar 2002
Location: Chestertown, New York
Posts: 17,052
Thanks: 26
Thanked 383 Times in 374 Posts
|
Re: 1990 Cutlass Ciera : Oil on manifold
Correct.
__________________
|
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|