|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Mar 2006
Location: Newberry, SC
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
I have an 86 E150 Conversion van by Franklin Motor Coach. The other day I installed a trailer hitch and accidently pinched and partailly cut the wiring harness in the frame. I lost all lights except headlights. Anyway, I re-spliced the wires and everything works EXCEPT my turn signals. Here's the wierd thing, the emergency flashers work fine. I also cannot find a seperate fuse for the turn signals either. I don't believe it has the standard Ford flasher. It has an expensive Bosch flasher on a seperate little fuse block. I'm lost at this point. Where should I start? I'm assuming the wires are ok now or the flashers wouldn't work, would they?
HELP |
|
|
|
|
|
|
#2 | |
|
AF Newbie
Thread starter
Join Date: Mar 2006
Location: Newberry, SC
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Turn Signal Trouble
Never Mind....Found it!
|
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|