|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#2
02-28-2006, 02:42 PM
|
||||
|
||||
|
Re: 92 Crown Vic 4.8 V8 Overhead Cam
Which sensors are you wanting to replace and why. There are 4 sensors on your car. 2 are right behind the engine just below the manifold on either side. The other 2 are located between the converter and collector. The last 2 are easy to see and get to. The 2 front ones are kinda buried under the exhaust. It takes a 7/8 wrench or a O2 socket to replace them.
__________________
Being way2old is why I need help from younger minds The sooner you fall behind the more time you'll have to catch up.  HEY Y'ALL--READ THIS Here are some of our old vehicles for sale. 
|
|
#3
02-28-2006, 04:27 PM
|
|||
|
|||
|
Re: 92 Crown Vic 4.8 V8 Overhead Cam
Need to replace because there is oil covering the sensor and no read out is available - if you are standing in front of the car it is the sensor on the left - the front 2 as you stated on either side of the manifold - I know we will have to buy a special tool for removal - thought we could remove ourselves and save some $ - might be better to replace both at the same time?
Thanks,
|
|
#4
02-28-2006, 06:40 PM
|
||||
|
||||
|
Re: 92 Crown Vic 4.8 V8 Overhead Cam
If it is on the passenger side front it is bank 1 sensor 1. If the sensors are original(probably) I would replace both. Might even consider the rears in the future.
__________________
Being way2old is why I need help from younger minds The sooner you fall behind the more time you'll have to catch up. HEY Y'ALL--READ THIS Here are some of our old vehicles for sale.
|
|
#5
02-28-2006, 09:28 PM
|
||||
|
||||
|
Re: 92 Crown Vic 4.8 V8 Overhead Cam
not to disrespect you way2old but there are only two scensors on the manifolds for that year not sure what years there was 4 but there is only two for the 1992 and you can get a special tool from any parts store that is a socket with a side cut out to fit the wire around and do them from the top ive found its not to hard but the pass side connecter is bout the hardest part so good luck
__________________
THE 92 grand marquis LS M75 with the 281 romeo v8 u cant mess with that MODS: dynomax bullit exhaust, custom intake, polished upper plenum, 180T-stat, accel coil packs and platnum plugs  also 2005 crysler sebring sedan walter p crysler edition yea its got the 2.4 pics comin soon
|
|
#7
03-01-2006, 09:05 AM
|
||||
|
||||
|
Re: 92 Crown Vic 4.8 V8 Overhead Cam
There is no special technique needed to replace the sensors. Just have the tool to remove the sensor and install new one. The hard part is getting to them. Since cobradude refreshed my memory, these are just barely accesible from the top. It is very clese quarters, but you can remove them. You are right cobradude. I got OBDII stuck in my head now. This one is an EECIV. Thanks for jogging my memory.
__________________
Being way2old is why I need help from younger minds The sooner you fall behind the more time you'll have to catch up. HEY Y'ALL--READ THIS Here are some of our old vehicles for sale.
|
|
#9
03-01-2006, 09:27 AM
|
||||
|
||||
|
Re: 92 Crown Vic 4.8 V8 Overhead Cam
no prob i was able to do them from the topjust a few weeks ago so i know it can be done just have patience
__________________
THE 92 grand marquis LS M75 with the 281 romeo v8 u cant mess with that MODS: dynomax bullit exhaust, custom intake, polished upper plenum, 180T-stat, accel coil packs and platnum plugs also 2005 crysler sebring sedan walter p crysler edition yea its got the 2.4 pics comin soon
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
