--------> Honda RC211V "03 finished!!! <------- (many pics)

[Roca46]

Well!!! finished now , some extra details how the airbox, orange conector, springs...

I hope that you like it!!


















PS: Joel you have one pm
PS2: The next model will be Yamaha M1 "04 V.Rossi

[builder77]

Looks Great!!

What carbon fiber did you use?
Studio 27 in some parts?

Chris

[Vitalik]

Very nice job!

[Roca46]

Thank's!

Yes i used Studio 27 CF decal in the seat support and Modeller's in other parts how the protectors of the chain and the protector of the upper exhaust pipe. This is 1/12 scale

Best regards

[sjelic]

Great job Roca, nice details and beautifull finish.
Great work!

[joelwideqvist]

Roca! Great to see it finished!
Points that I especially like are the blue transponder, wheathering of the exhaust (very subtle), exhaustsprings (finally ones on a model that look in scale!), detailing of the right front fork and disc AND your very nice rear brake disc!

But, what happened to the airbox. Seemed really nice when you did the mockup in the progress thread but now it seems smaller and not really that real, I would like to see it go all the way down to the tank, like this http://www.onetwelvth.com//tips/refe...3%20airbox.jpg
Other than that I would only put a few strokes of flat black inside the silencers to make it look used and open.
best regards
Joel

ps. is that the studio 27 racing stand by the way? Looks great!

[hrmodeler]

It's very nice!

[Bas Carwash]

That looks very very clean. Nice work!

[Roca46]

Hey!!! thank's all!!! thank you Sasa without your help the bike would not be more realistic

Originally Posted by joelwideqvist

But, what happened to the airbox. Seemed really nice when you did the mockup in the progress thread but now it seems smaller and not really that real, I would like to see it go all the way down to the tank, like this http://www.onetwelvth.com//tips/refe...3%20airbox.jpg
Other than that I would only put a few strokes of flat black inside the silencers to make it look used and open.
best regards
Joel

ps. is that the studio 27 racing stand by the way? Looks great!

**Hey joel!!! yes.. the airbox is not good..but i will try to make one than the real airbox and yes is the racing stand of S27.I will paint with black the hole of the exhaust pipes

**hrmodeler you can take the photos that you need for the Best Model of The Month

Thank's for all!!!

[RallyRaider]

Stunning work Roca.
Do you only build bikes with the number 46 on them?

[Roca46]

Originally Posted by RallyRaider

Stunning work Roca.
Do you only build bikes with the number 46 on them?

yes because i want to have the Valentino Rossi's Collection but one secret project (never seen) is coming later (Not with number 46 )

Thank's RallyRaider!!

[RandyPng]

It looked so real! I wish I had this...

[Sam Berdino]

Amazing model!

Looks like you got wrong colour on the wheel rims. Of the Repsol fluorescent red and orange it´s the orange on the rims, not the red!

[Verminator]

Originally Posted by Sam Berdino

Amazing model!

Looks like you got wrong colour on the wheel rims. Of the Repsol fluorescent red and orange it´s the orange on the rims, not the red!

Its a trick of the light due to the photo process if you check out my picks of the Nicky Hayden version of this bike I posted recently they look the same colour but are very orange in real life. BTW great model with nice extra details.

[Roca46]

Hey thank's, the paint i think that is the same of the Instructions manual (I do not remember) , but yes.. in this pictures the colour looks a bit red how the bike of Verminator

Anyhow there are new pictures and looks more orange than the other pictures










Bye!!