|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|
#1 | |
|
AF Newbie
Join Date: Jun 2004
Location: zanesville, Ohio
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
frontend noise
My 98 with about 100k has started makeing strange noises from the front . It first started when making a left or right turn it would feel (thru the steering wheel) like the tires were crabing almost as if in 4wd on dry pavement. Then this stoped about a week ago and it now makes a scraping noise from around the front wheels when going around corners at moderate speeds. Have pulled wheels and don't see anything that stands out. Any ideas (u-joint) ??? Thanks jw
|
|
|
|
|
|
|
#2 | |
|
AF Newbie
Join Date: Jun 2004
Location: tahoe city, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi there,
It sounds like i've been having a similar problem with my 96 with 100k on it. Definitely acts up on turns, and when i'm on forest roads there is a distinctive "rattle". I've had friends say it sounds like a CV joint thing, but really have no idea. I'll keep you updated if I come to any conclusions, let me know what you find. Good luck! -jaimoe |
|
|
|
|
|
|
#3 | |
|
AF Newbie
Join Date: Jul 2004
Location: Parksville
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Hi there, I had the same noises/feeling on my 90 Cherokee Ltd last year. Turns out it the bushings on the upper control arms had worn and it was causing a jerking motion/noise at the differential. Replaced both arms (bushings not available seperataly) and everything works and sounds great. Take a look at yours. Hope this helps!
|
|
|
|
|
|
|
#4 | |
|
AF Newbie
Join Date: Jul 2004
Location: Vail, Colorado
Posts: 26
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: frontend noise
I had a similar problem, grinding and shaking when cornering. I replaced the front u joints and the bearing assembly and solved the problem. After doing the job I realized that It was the passenger side bearings that had failed. It seamed fine when I spun the wheel with the front end jacked up but when I got the bearing off I could tell that it had been overheating the metal around the bearing looked burnt and pitted. I went ahead and replaced the u joints with greaseable ones while I had the oppertunity.
check out the picture www.angelfire.com/va3/delta9/hub.html -JC |
|
|
|
|
|
|
#5 | ||
|
Nothing scares me anymore
![]() Join Date: Dec 2003
Location: City of Light
Posts: 10,702
Thanks: 12
Thanked 82 Times in 77 Posts
|
Re: frontend noise
Quote:
|
||
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|