 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
02-11-2007, 10:49 PM
|
#1 | |
|
AF Newbie
Join Date: Jan 2007
Location: WILLIAMSBURG, Virginia
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Z24 Motor Not Mounting To Motor Mounts Same Type Engine As Previous
We Just Pulled The Motor Out Of Our 86.5 Hardbody Nissan. We Tried Mounting The Rebuilt Motor We Ordered And It Is Off By About A Quarter Of An Inch When It Comes To Mounting It On The Bolts. We Measured The Actual Width Of The Motor And It Appears To Ba About That Much Wider! Its Strange But Does Anyone Have Any Tips Before We Go At It Again Tomorrow?
|
|
|
|
|
02-12-2007, 01:42 PM
|
#2 | |
|
AF Fanatic
Join Date: Sep 2004
Location: Atlanta, Georgia
Posts: 4,088
Thanks: 21
Thanked 152 Times in 148 Posts
|
Re: Z24 Motor Not Mounting To Motor Mounts Same Type Engine As Previous
I find it easier to loosely attach the mounts to the block, and insert the mount-to-frame bolts once everything is in place.
|
|
|
|
|
|
02-12-2007, 09:51 PM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Jan 2007
Location: WILLIAMSBURG, Virginia
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Z24 Motor Not Mounting To Motor Mounts Same Type Engine As Previous
That makes sence, and we are going to try but had to take the day off from it today. (by the way I mistakingly stated that the new motor is slightly wider, they are the same)
Thanks |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
