Subaru Impreza WRX Type R 2 Doors

[cham2020]

I started it yesterday
managed to finish the chassis.

here are some photos. the car body is not clear coated yet

[cham2020]

[NissanSkylineGTR98]

Nice work! The interior looks good.

[cham2020]

stripped the paint twice
now it's been clear coated and polish with tamiya polishing compound
still got some nimor orange peel from certain angles
and sorry about the photos
they are bad..once the model is completed i will post better photos

[cham2020]

Orange peel is back !! Oh My god however they are not serious
but close view gave them away





It's almost finish. Left only license plates, side mirrors, rear and front skirtings, and a bloody spoiler/gtwing

[cham2020]

Ok guys
i decided to leave it wingless,as i think it look much better like that.
and i left out the rear skirts cause i want to have a stock look from the back

here is the final model
orange peel !! very obvious when the camera is near to the model and certain angles
<_< terrible build !

[drunken monkey]

you really should spend more time to finish off the body's paintwork properly.

[cham2020]

okay

[godfather23]

Originally Posted by drunken monkey

you really should spend more time to finish off the body's paintwork properly.

I agree. To me it looks like there is way to much paint on the body. Nevertheless, compared to your other models, you are improving quite well!

[cham2020]

i think it's the clear coat problem. i recently have problems with clear coats. maybe the quality of it is not very good.......and i didn't wetsand this model and i directly polish using tamiya rubbing compound ( all in one )