|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Register | FAQ | Social Groups |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
knock sensor link
I would like a link to purchase a knock sensor for 93 camry 3.0
|
|
#2
|
||||
|
||||
|
www.anywhereyouwant.com
Na, in all seriousness, 98% of the time the problem is in the wiring to the sensor. The sensors are nothing more than a peizo, they themselves rarely fail because they're isn't anything about them that really can fail. Replace the wiring & connectors.
__________________
Toysrme257th - AIM about anything, anytime; including v6 turbos. World's second ES 300/3vz-fe Turbo. |
|
#3
|
|||
|
|||
|
Re: knock sensor link
Quote:
1) a check light that comes on when the car warms up. 2) show up as a code 52 a 3)cars does not idle properly. 4) poor gas milage 20 mpg Would bad knock sensor wiring give above symptoms Would a bad knock sensor. Hagman I have been to 8 mechanics, hours surfing the forum and net $200 worth of parts$200 worth of diagnosis to get to this point. I am ready to scrap this car which has agreat compression and everything else works great. Thanks Hagman |
|
#4
|
||||
|
||||
|
Re: knock sensor link
Put everything together...
ECU is detecting: 1) Fault in the knock sensor, 2) Severe knocking. Obviously it will run rich & retard ignition timing as a result of that. Take the terminal off & check that there is no continuity between the knock sensor's terminal & the body of the knock sensor. If not, it should be fine - wiring/connection is a problem somewhere.
__________________
Toysrme257th - AIM about anything, anytime; including v6 turbos. World's second ES 300/3vz-fe Turbo. |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
| Thread Tools | |
|
|