95 Bonneville Keyless Entry

[qball21]

Will any keyless Entry be able to program too my car? found one on ebay can get it cheap but do not want to buy from the dealer it is expensive?

[pntcbonnesse]

no, not every keyless entry will be able to program to your bonneville. You have a 95... You need the Key fob that is rectangle, from left to right the lock button the trunk button and under those two you need the unlock button... if you need help programming it let me know ok?
ok I was able to find you a picture of what the one you need will look like.... it does say buick but it doesnt matter what symbol is on it it will work (you should get a Pontac one tho... if you had one that said buick that would look a little ghetto ya kno!?!) Notice on the pic the placement of the buttons
http://cgi.ebay.com/ebaymotors/ws/eB...category=33723

[sg1021]

No spam allowed

Hypsi87

[qball21]

Thanks I called the dealer and got the # I got one off ebay hope it works,

[pntcbonnesse]

no problem and remember if you need help programming it let me know

[choche5000]

Originally Posted by pntcbonnesse

no problem and remember if you need help programming it let me know

HI I need the programming instructions for the keyless remote, where can I obtain them???

[pntcbonnesse]

for which year and model Bonneville?

[qball21]

hey looks as if i need some programming help I have a 95 Bonne sse would appreciate it

[choche5000]

Originally Posted by pntcbonnesse

for which year and model Bonneville?

Bonneville 95 SE

[pntcbonnesse]

For the 1995 Bonneville SSE and possibly SE on your OBD I ground pin 4 with pin 8... hold it there... when doors lock and unlock dont be afraid it is to let you know that the car is ready to program. While the Pins are connected to each other press one button on the key fob... if you hear whichever button you press engage, then the fob is programed, if you have another (up to four) press a button on that one and when that engages that fob is also programed. Now disconnect the connection between pin 4 and pin 8. Your fob(s) are ready to use. If at any time pin 4 and pin 8 are connected again then the fobs will not work and you will have to reprogam them

sorry it took me so long to get back to you my laptop burned out. I hope this helps and let me know when it works. Thanks for waiting!

[pntcbonnesse]

did it work?

[qball21]

I just did it yesterday and thanks it worked was a breeze