|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Register | FAQ | Social Groups |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
06-14-2004, 10:54 PM
|
|||
|
|||
|
Fuel Gauge Problems
I have a 2000 LS 4.3L With a fuel gauge acting more like a windshield wiper. It goes to empty when it's full and if you shake the truck it will jump to full but It doesn't let me know where I'm at on fuel. Any Help!!!
|
|
#2
06-15-2004, 12:37 AM
|
|||
|
|||
|
Re: Fuel Gauge Problems
probably sending unit in tank
__________________
Click To See My Ride 2000 Chevy Silverado LT Z71 K1500 ecsb, 6" suspention lift, 4.56 gaers, 315/75r16 bfg mt, radix supercharger, gibson headers and cat back, trasgo shift kit, aluminum servos, nelson tune
|
|
#4
06-15-2004, 08:28 AM
|
|||
|
|||
|
Re: Fuel Gauge Problems
farirly easy, the fuel level sender unit can be kind of expencive call an auto parts store for a price. dropping the ges tank is hard sometimes if the strap bolts are rusted up, try and do it with an almost empty tank, some guys take the bed off.
__________________
Click To See My Ride 2000 Chevy Silverado LT Z71 K1500 ecsb, 6" suspention lift, 4.56 gaers, 315/75r16 bfg mt, radix supercharger, gibson headers and cat back, trasgo shift kit, aluminum servos, nelson tune
|
|
#5
06-25-2004, 10:24 PM
|
|||
|
|||
|
Re: Fuel Gauge Problems
sending unit about $150 and with out a doubt easier to take the bed off rather than drop the tank. also the wires are notorious for breaking off right where they enter the top of the sending unit so check there you maybe able to resplice it or solder a new wire to were it may have broken. I replaced a fuel pump on my 88 s10 blazer to reinstall it, and find out it was a bad power wire at the top going into the pump that went bad and not the pump
|
|
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
