|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Register | FAQ | Social Groups |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#2
04-07-2005, 11:18 AM
|
||||
|
||||
|
Re: how to take off the bowtie in grill??
On the older trucks (88-98) you had to take out the grille and then there were 2 screws that held the bowtie in place.
__________________
**1966 Chevy II**  355 SBC, Turbo 400, 5.13 gear, IHRA Certified to 8.50 in the 1/4 Last Race (10-6-07) So its been awhile... Dial: 6.77, RT: -.0001, 60': 1.4360, 1/8th: 6.7942 @ 100.65 mph Fastest Pass of '07 (10-6-07) 60': 1.4360, 330': 4.3453, 1/8th: 6.7942 @ 100.65 mph 25 and in BIG TIME Debt Crew member #2  Deuce's Wild Racing: Take a Ride on the WILD SIDE 
|
|
#4
04-07-2005, 10:31 PM
|
||||
|
||||
|
Re: how to take off the bowtie in grill??
My '01 had 7 plastic clips on the radiator cover, remove the cover, 1-10mm bolt right of the hood latch, 4-phillips head screws at the corner of the lights and grills, and pull the clips out of the ends next to the fender. Now that the grille is off you pinch the plastic tabs in the center of the grille carefully and the bowtie will fall out..... Now put it together backwards. 1/2 hour at most when you have to stop and keep sampling the brew to keep cool.
__________________
 "The Sleeper"  '05 6.0L VHO Cam in and Low 14's happening at the track  Check out my Ride
|
|
#5
04-08-2005, 12:19 AM
|
|||
|
|||
|
it unclips off the grill from the back. it has 2 clips on the sides. i took the grill off which is also very easy to do. 4 phillips clips and 1 10 mm bolt and it came off.
|
|
#6
04-08-2005, 12:19 AM
|
|||
|
|||
|
it unclips off the grill from the back. it has 2 clips on the sides. i took the grill off which is also very easy to do. 4 phillips clips and 1 10 mm bolt and it came off.
|
|
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
