|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Register | FAQ | Social Groups |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
Gauges not working/No BUS 2001 Ram 5.2
My check engine light was on (code PO442/P0455). Well I replaced my gas cap and that didnt fix it. So I check under the hood to look at the hoses where the canister is. I tighten the cap where it says Evap 1lb pressure.....OK, I go to start the truck now and the gauges don't work and the mileage area says NO BUS...
Anybody know what the problem is?? |
|
#2
|
||||
|
||||
|
Re: Gauges not working/No BUS 2001 Ram 5.2
sounds like your instrument cluster has lost the communication between it and the BCM or PCM. If it's intermittent, check the connection behind the cluster to see if there's a loose connection or crap behind it.
|
|
#3
|
|||
|
|||
|
Took it to the dealer today. They told me I need a new gauge cluster. 800 bucks....damn
|
|
#4
|
||||
|
||||
|
Re: Gauges not working/No BUS 2001 Ram 5.2
go search on ebay or a junkyard; you'll find one for a lot cheaper than $800; usually they'll run $150 to $200.
|
|
#5
|
|||
|
|||
|
Actually the part costs 500 and the rest is installation...
|
|
#6
|
|||
|
|||
|
Re: Gauges not working/No BUS 2001 Ram 5.2
Quote:
|
|
#7
|
|||
|
|||
|
Yeah, the dealership told me I need a new cluster (ie: Gauges).
|
|
#8
|
|||
|
|||
|
Re: Gauges not working/No BUS 2001 Ram 5.2
Quote:
Thanx fer responding......... |
|
#9
|
|||
|
|||
|
The cluster was replaced..... Still kinda upset..I only have 44k miles on my truck. C'mon, it shouldn't go bad.
|
|
#10
|
|||
|
|||
|
Re: Gauges not working/No BUS 2001 Ram 5.2
Quote:
|
|
#11
|
|||
|
|||
|
I live in Miami too. I took it to Dadeland Dodge. Yeah, everything is operational. No the gauges were not under warranty. One problem though... Before the guages went bad on me my check engine light was on(code P0455 & P0442). Well I told them that and they did say that is was a sensor which was under warranty. About 5 days later the check engine light came back on. I check the code and it's the same one. Now i have to take it back in.
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
| Thread Tools | |
|
|