zc parts

[ashcrx]

on the zc what header fits and also like plugs and wires and cap.thanks for the help.

[Autocratic_1st_Gen]

any SOHC d-series header fits.

plugs/cap/wires for 1st gen teg , i think

[tooslow911]

Is it true that you have to port usdm d series headers to fit correctly on a ZC or it's just another false info spread on the web?

[spongerlbc]

Taken directly from www.theZCr.com:
Stock Parts:
"-Head Gasket Integra 88-89
-Valve seals Integra 88-89
-Valve cover gasket Integra 88-89
-Cam oils seals Integra 88-89
-Intake Manifold Gasket Integra 88-89
-Exhaust Manifold Gasket Integra 88-89
-Main bearing Civic Si 89-91
-Connecting Rods Integra 88-89/Civic Si 89-91
-Pistons Integra 88-89
-Crank Shaft Integra 88-89/Civic Si 89-91
-Timing Belt Prelude Si 2.0 88
-Crank Seal Integra 88-89/Civic Si 89-90
-Rear Main seal Integra 88-89 /Civic Si 89-91
-Radiator Hose Upper Accord 84
-Radiator Hose Lower Civic 88-91
-Water pump Civic 88-91
-Oil Filter Civic Si 89-91
-Spark Plugs Civic 88-91
-Spark Plugs Wires Integra 88-89
-Oil Pan Gasket Integra 88-89/Civic 88-91
-Oil Pan Integra 88-89
-Oil Pump Integra 88-89
-Cam Gears All B serie and H23 DOHC
-Fuel rails Integra 88-89/Civic Si 89-91
-Thermostat Integra 88-89/Civic 88-91
-Couvercle de thermostat Integra 88-89
-Valve cover, bolt and Studs CRV 97-00/Integra All Ex.Vtec 90-01
-Fuel Pressure Regulator Integra 88-89/Civic Si 89-91
-Distributor Integra 88-89
-Distributor Cap Integra 88-89
-Crank Position Sensor Integra 88-89
-Injectors Integra 88-89/Civic Si 89-91
-Motor Mounts Civic Si 89-91
-EACV Integra 88-89/Civic Si 89-91
-Throttle Body Integra 88-89/Civic Si 89-91
-Gasket Throttle Body Integra 88-89/Civic Si 89-91
-Throttle Position Sensor(TPS) Almost all Honda (exc.DPFI)

Thanks to Garret for his list of stock parts!
Aftermarket parts:
-Kamikaze header
-NGK Integra plugs
-B&M FPR/Gauge *Universal*
-MSD system
-Rc 270cc injectors *OBD-0 or 1 available*
- EndynStainless valves
-Web camshafts
-Jun cam gears *TJ makes some as well, they are also cheaper*
-Power timing belt
-Dc header *88-91 top and 88-89 integra bottom works best*
-Endyn pistons *There are a variety or compressions for both NA or FI*
-Eagle rods
-Clutchmaster flywheel *Or any aftermarket flywheel for a 89-91*
-Any aftermarket clutch will work as long as its for a 89-91 civic unless your using an 88 transmition, same goes for flywheel*"

[CivicYoungin]

since those stock parts fit zc can a aftermarket from the same engine fit the zc...

Example:

since a stock Cam Gears for All B serie and H23 DOHC fit the zc can AEM cam gears for any b serie fit the zc?

[Cjz89civic]

Yes

[jeffrule]

thanks spongerlbc exactly what i needed!!! i have a zc and its hard as balls to find parts for from parts stores(online) and other. this deff. helps

[91civichatch2571]

Also, heres a kick ass after market supplier for the zc ive gone through a couple times. Customer support is actually real good too

[1PhatCX]

also, with the header. i've found an 89 teg header works good and needs very little porting to make work since ur using the 89 teg exhaust manifold gasket anyways.

[spongerlbc]

A side note: the B-Series cam gear will work but the timing belt will not rest in the middle of the gear...it will be off to a side. To correct this simply shave (not sure exactly how much) the inner hub of the cam gears so the belt rides in the middle.

[1PhatCX]

i think i heard somewhere its like an 1/8 of an inch off