 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-12-2005, 08:18 PM
|
#1 | |
|
AF Newbie
Join Date: Jul 2004
Location: Abilene, Texas
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
Back Firing stalling ?
I've got a 97 3.3 starts good after about 10 minutes back firing and missing and stall No codes ? new cam sensor plugs and wires 1 year old. any ideas very much appreciated before I break down and spend more $$$
|
|
|
|
|
06-12-2005, 10:05 PM
|
#2 | |
|
AF Regular
 
Join Date: Dec 2004
Location: portsmouth, New Hampshire
Posts: 139
Thanks: 0
Thanked 0 Times in 0 Posts
|
-
Might be an issue with the timing, but try the test outlined here: http://www.automotiveforums.com/vbul...d.php?t=398005  - |
|
|
|
|
|
06-14-2005, 11:39 PM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Jul 2004
Location: Abilene, Texas
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
|
 Caravandrvr Thanks so much would have never figured that one out. one thing , how come no codes when system drops bellow 12v. it did stall out only took ten minutes though. thanks again Tom  |
|
|
|
|
|
06-15-2005, 11:08 PM
|
#4 | |
|
AF Regular
Join Date: Dec 2004
Location: portsmouth, New Hampshire
Posts: 139
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Back Firing stalling ?
-
Can't say for sure why it won't throw a code - I can only assume that when the voltage drops it chokes the computer. I have seen them throw a code 41, but a lot of times it doesn't, and even when it does it gets misdiagnosed! Thanx for the follow up and letting us know it helps. Since I started working on these things I've come to the conclusion that they get a bad rap due to a lot of misdiagnosis causing parts to be needlessly changed. This is one of those types of things - right up there with "you need a new transmission".....  - |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
